Clarion M303 Bluetooth Pair List Full

[Seattleite]

Hi all,

I'm wondering if anybody has had this problem, and might have a solution!
Apparently, once the M303 has had 3 different units paired with its Bluetooth - the pair list is now full and nothing else can be paired to it.

My wife & I have both gotten new cell phones, and can not pair them to the M303 via Bluetooth.
We get a message on the remote screen - "Bluetooth Pair List Full."

Anyone know how to clear the Bluetooth Pair List?

Thanks in advance!

 

[Lanier Tom]

Looking at the M303 manual on the Clarion website:
SELECT (BT mode)
This “SELECT” menu is intended toautomatically paired by selecting a mobilephone was stored.
This unit can store three mobile phones. Themobile phone will be stored in paired orderto the unit. The fourth mobile phone can notbe stored. If you want to store a fourth mobilephone, please delete unwanted mobile phonefrom “DELETE” menu.

1. Rotate the [VOLUME] knob to choosethe paired mobile phone name from thepairing list.
   
2. Press and hold the [VOLUME] knob toconfirm.
   
   

DELETE (BT mode)
1. Rotate the [VOLUME] knob to choose
the paired mobile phone name from the
pairing list.
2. Press and hold the [VOLUME] knob to
confirm.
DISCONNECT (BT mode)
Disconnect currently connected mobilephone.
1. Rotate the [VOLUME] knob, mobile
phone displays are currently connected.2. Press and hold the [VOLUME] knob to
disconnect.




I think the DELETE instructions will get you there. You could also try the RESET instructions by pressing that button which is behind the faceplate on the left side.

Good luck! Could you share how you like or don't like the M303 since I've been thinking about it as a replacement?

 

[Seattleite]

Thanks so much, Lanier Tom!
I've searched online, and looked through the M303 manual and somehow missed these Delete instructions.
The manual states that hitting the Reset button does not erase stored stations, etc so I think that the Delete path is the way to go.

As for the M303 - I absolutely recommend it.
The Bluetooth on it is amazing.
I've walked 50 feet down the dock from the boat with the iPod, and it was still connected!
I did quite a bit of research before choosing this unit, and have been nothing but impressed.

Thanks again!

 

[qadams]

I am looking to get an updated radio system for my "new" 2003 Sea Ray 240 Sundeck and have the M303 at the top of my list. Some reviews I have read said you have to pair the iPhone every time you use the boat. I am assuming this is because of turning the batteries off. Have you had this issue or does your phone automatically stay paired up when you go out to the boat each time. And I guess to go along with that - are you turning your batteries off when done each time?