Changing bulbs to LED

Discussion in 'Announcements & FAQs' started by Two Captains, Jun 4, 2016.

  1. Two Captains

    Two Captains New Member

    6
    Jun 30, 2015
    UTAH
    2004 340 Sundancer
    Twin 8.1 Brovo III
    Im having trouble finding out what bulbs I need for my arch and navigation lights.
    have a 2004 340 Sundancer can anybody help me with what bulbs I need?
     
  2. Havana Shamrock

    Havana Shamrock Well-Known Member

    Sep 9, 2008
    Long Island.
    2005 500DB
    QSM11's,
    Honda 30HP
    Sea Doo 90 HP H.O.
    Be careful changing just the bulbs on the nav lights they may not meet CG regs after your done. You may need to change the entire fixture...
     
  3. h_gerry

    h_gerry Active Member GOLD Sponsor

    Jun 19, 2013
    Oceanside, NY
    400 Express Cruiser - 1994 with
    Raytheon 41xx Radar, Northstar 6000i GPS
    Kohler 5E
    454 Mercruiser Inboards
    I agree with Joe about the nav lights. The other lights is a matter of searching Amazon or your favorite vender for the replacement bulbs. Best bet is to open the fixture, get the bulb number then search for the LED version of that bulb. If that fails, you can just change the whole fixture (that is what I did for the arch lights).
     
  4. mnm99

    mnm99 Active Member SILVER Sponsor

    Oct 2, 2015
    Long Island
    2004 340 SeaRay Sundancer
    Twin 8.1 Merc
    Inside arch and floor
    http://www.amazon.com/Cutequeen-Whi...oh_aui_detailpage_o08_s00&tag=viglink21308-20

    Nav and anchor.
    http://www.amazon.com/AUTOSAVER88-F...&redirect=true&ref_=oh_aui_detailpage_o06_s00

    Nav red and green. I did have to reverse the wires to get then to work. The wires are found in the cabinets next to the bed. Unzip the fabric inside and you can get easy access..As for being CG approved. I can tell you they are clear and crisp red and green. If they give you a hard time that would be messed up, because they can be seen much better.
    https://www.superbrightleds.com/mor...orward-firing-cluster-ba15s-retrofit-car/169/
     
  5. Two Captains

    Two Captains New Member

    6
    Jun 30, 2015
    UTAH
    2004 340 Sundancer
    Twin 8.1 Brovo III
    Thanks for the information, I am going to give it a try.
     
  6. Mike Blake

    Mike Blake Active Member

    Jan 27, 2012
    Yankeetown FL West coast
    89 340 Sundance all Raymarine.
    Gas hogs 454X2.
    I did ALL mine some years ago. Very nice upgrade. Not cheap but worth it.
     
  7. mnm99

    mnm99 Active Member SILVER Sponsor

    Oct 2, 2015
    Long Island
    2004 340 SeaRay Sundancer
    Twin 8.1 Merc
    FYI though. The nave and Anchor light I had to sand down the contact a hair to make it fit. I think the original was like 29-30mm the one I bought was 31mm. It may fit though.
     
  8. Two Captains

    Two Captains New Member

    6
    Jun 30, 2015
    UTAH
    2004 340 Sundancer
    Twin 8.1 Brovo III
    That's good to know.. Thanks
     
  9. Two Captains

    Two Captains New Member

    6
    Jun 30, 2015
    UTAH
    2004 340 Sundancer
    Twin 8.1 Brovo III
    Thanks the lights worked great. Did you replace the cabin lights? if so do you have a model number.
     
  10. mnm99

    mnm99 Active Member SILVER Sponsor

    Oct 2, 2015
    Long Island
    2004 340 SeaRay Sundancer
    Twin 8.1 Merc
    All...I'll get the numbers for you later.
     
  11. Two Captains

    Two Captains New Member

    6
    Jun 30, 2015
    UTAH
    2004 340 Sundancer
    Twin 8.1 Brovo III
    thanks
     
  12. mnm99

    mnm99 Active Member SILVER Sponsor

    Oct 2, 2015
    Long Island
    2004 340 SeaRay Sundancer
    Twin 8.1 Merc
  13. TracyT

    TracyT New Member

    44
    Jun 14, 2016
    Middle River Md
    1988 Sea Ray 305
    Twin 5.7L mercruiser inboards
    I found anchor light replacements on Amazon.com super cheap for my 305 Sedan Bridge
     

Share This Page

Show Sidebar