Cabinet verneer

[Chris-380]

2000 380 DA, cabinet finish is delaminating. Used 3m spray adhesive (recomended in another thread) and it holds for a short time, but eventually releases. In the summer, I leave my ac on dehumidify when not at the boat.

I have left it secured with tape for weeks, and it comes loose maybe a week after I remove the tape

It’s on a curved piece just forward of the factory radio location....

any other adhesive suggestions?

thanks in advance!

 

[Express 390]

2000 380 DA, cabinet finish is delaminating. Used 3m spray adhesive (recomended in another thread) and it holds for a short time, but eventually releases. In the summer, I leave my ac on dehumidify when not at the boat.

I have left it secured with tape for weeks, and it comes loose maybe a week after I remove the tape

It’s on a curved piece just forward of the factory radio location....

any other adhesive suggestions?

thanks in advance!

If you can try to get the adhesive on both verneer, and cabinet surface and let dry to the touch before bringing them together !

 

[atrick]

You need to go to a cabinet shop with a glass jar and get a little bit of their solvent based contact cement, you can't buy that stuff at any store, commercial use only but it will stick and hold plus most of it is tinted red so you can see what your putting on.