cabin table

[kbeardadams]

Just bought 1986 250 Sundancer. Can't figure out how to remove cabin table. Anybody have any suggestions? We don't have a manual. Needs a few cosmetic adjustments. Before and after pics coming. Thanks to any responses.

Kathy and Mike

 

[Nehalennia]

wiggle and pull up.

 

[KRB64]

wiggle and pull up.

Ditto. Over time they get stuck if there's been weight or downward force on them.

 

[Sundancer]

Wiggle and pull until it comes out. Next time you put it up use some Pam cooking oil on it and it will be easier to insert and remove.

 

[kbeardadams]

Thanks, everyone. It finally came out with a lot of wiggles and some WD-40.

 

[Lazy Daze]

Clean the pole and the socket real good - hopefully that should help to eliminate the problem in the future.

I do the 'whack-it' method - one hand pulling up and with the other hand give the side of the pole a tight, little tap/whack.

 

[Henry Boyd]

Clean the pole and the socket real good - hopefully that should help to eliminate the problem in the future.

I do the 'whack-it' method - one hand pulling up and with the other hand give the side of the pole a tight, little tap/whack.

Dennis, You did read that before you posted right?

 

[Jack F]

Clean the pole and the socket real good - hopefully that should help to eliminate the problem in the future.

I do the 'whack-it' method - one hand pulling up and with the other hand give the side of the pole a tight, little tap/whack.

Dennis, You did read that before you posted right?

This is when a post changes direction down ward :lol:

 

[Lazy Daze]

Dennis, You did read that before you posted right?

Oh my! :wow:

I did read through it once to make sure it conveyed my intended thought. Apparently it doesn't read as I intended, huh? :smt101