Has anyone used Bristol Finish on their Teak or any of their other wood finishes? If you have how well did it hold up?
WWW.bristolfinish.com
WWW.bristolfinish.com
Bristol Finish
- Thread starter DougLas
- Start date
AKBASSKING
Active Member
- Apr 13, 2008
- 4,649
- Boat Info
- 1988 Yacht Fisher
- Engines
- Twin 375hp Cat 3208 T/A
This is what I used and it seems to be holding up well. Lowes $8 a can.
http://clubsearay.com/forum/showthread.php?t=18365&page=2
http://clubsearay.com/forum/showthread.php?t=18365&page=2
Asureyez
New Member
- Apr 22, 2007
- 1,535
- Boat Info
- Sea Ray 460 Sundancer Hardtop 2001 - SOLD
- Engines
- Cummins 450 Diesels
Here is the MSDS on the product.
http://www.bristolfinish.com/PDF_Files/TA_MSD.pdf
It is a catalyzed Urethane with a mother load of UV shielding.
When properly applied, this stuff will go the distance. But get this, several coats will be required to get the high gloss build you probably want. Mix in small batches, just enough to do the work as the material will probably set off before you can get to the next coat.
I love the look of real wood well cared for on a boat, makes my heart soar!
http://www.bristolfinish.com/PDF_Files/TA_MSD.pdf
It is a catalyzed Urethane with a mother load of UV shielding.
When properly applied, this stuff will go the distance. But get this, several coats will be required to get the high gloss build you probably want. Mix in small batches, just enough to do the work as the material will probably set off before you can get to the next coat.
I love the look of real wood well cared for on a boat, makes my heart soar!