Boat Covers?

[Beau Weaver]

I am looking for recommendations on where to get a boat cover and bikini top made for my 1974 Sea Ray SRV220. I am also looking to talk to members with the same model as mine as I have some questions. Also looking for other parts.

 

[yobub]

For a boat of that age, it is most likely that you will need to have a custom cover made by a local canvas shop or buy a generic cover. There are some shops that did some of the original Sea Ray OEM canvas, such as Great Lakes Boat Tops, but I don't know if they did patterns that far back.

Depending on how much you want to spend, the generic covers might not be a bad option. I have had custom covers made for the 1995 Four Winns and I usually end up spending $1500-2000 each time.

If you are looking for parts, a couple of options you will find referenced frequently on this site are Flounder Pounder and Great Lakes Skipper.

If you list your location, people nearby you may have some local options as well.

 

[Boater420]

Welcome to CSR!

A local canvas guy might be another option depending on your needs.

 

[KevinC]

I am looking for recommendations on where to get a boat cover and bikini top made for my 1974 Sea Ray SRV220. I am also looking to talk to members with the same model as mine as I have some questions. Also looking for other parts.

A bimini cover should be easy - it's just width and height fit if you don't need an enclosure.
The cover will more than likely need to be custom or near fit.

We are distributors for Great Lakes Boat Top and they never made a full cover - only partial covers like cockpit covers.
Also I think they only go back to the early 90s.

For a full cover a near fit may serve the purpose. If you have questions you can PM me your info or call me.

-Kevin