Bennett trim tab system on 2008 Sea Ray 240 Sundancer?

[ASeaDSea]

I bought a used 2008 Sea Ray 240 Sundancer and I'm trying to find out who the manufacturer is for the factory installed trim tabs.
The hydralic actuators aren't marked with the manufacturer name however there is a Bennett HPU installed.
I want to install the electronic indicator or the NMEA 2000 indicator and want to make sure I have Bennett actuators.
Were Bennett trim tabs the ones Sea Ray used in the 2008 productions boats and is there a way I can tell if the actuators are Bennett actuators?

Thanks.

 

[Tabman]

I am sure they are Bennett, back then we did not place the company name on the actuators. We did make some "nonstandard" actuators for SeaRay, so please go look at the installation instructions for the NEMA1 and look at the first bullet point and illustration to to identify if you have one that will need special sensors. Here is a link http://www.bennetttrimtabs.com/wp-content/uploads/2015/04/NMEA1_install_instructions.pdf

I hope this helps,

Tom McGow
Bennett Marine

 

[Lazy Daze]

They are definitely Bennett - the whole system.

 

[ASeaDSea]

Thank you very much for the information and the link. I will take a look at it this weekend!!!