Beam Width Question.

[Krazzeeddie]

So does anyone know the exact beam width of a 1993 Sundancer 370?

Manual says 12' 4" I just want to know if that is correct, the ice this year was hard on my main dock and it was to short anyway for the new boat, I don't have a ton of play without moving all my docks and come to find out the main dock runs on a small angle which complicates things more.

Ed

 

[fwebster]

If the Sea Ray specs say 12'-4", then that is the width of the boat…….unless some one has added some option like fender baskets, rod holders, aft enclosure, etc. that has extended the beam.

 

[dtfeld]

I would add that the beam at the waterline is probably skinnier, as the published beam is the widest point and likely measured at the rubrail

I went and measured a local boat when planning for mine

 

[Krazzeeddie]

I would add that the beam at the waterline is probably skinnier, as the published beam is the widest point and likely measured at the rubrail

I went and measured a local boat when planning for mine

Thanks, I was unsure of where they measured the width at on the boat I was thinking it was the rub rail but I figured it never hurts to ask.