Baltimore MD Marine mechanic

Discussion in 'Mechanic Recommendation Forum' started by ASDF, Dec 2, 2017.

  1. ASDF

    ASDF Member

    Sep 18, 2017
    Can anyone recommend a good marine engine mechanic near Pasadena/Baltimore MD? I had a survey done on a 92 sea ray 400 express cruiser and based on the following issues I'm planning to get a leak down test and coolant analysis at the recommendation of Frank Webster.

    I had white smoke/steam coming out starboard exhaust starting around 1500 rpm, maybe 2-3' worth. Then at wot a lot came out both sides. The boat had no problems getting to 4300 rpm at wot and the engine temps were good. The other issues that may go along with this smoke/steam:

    1-the expansion tank was overflowing because of the increased pressure in the coolant system of the starboard engine prior to reaching normal operating temperature. The overflow subsided and tank level wrnt back to a normal level when the block, cylinder head and gasket normalized (expanded and sealed).
    2-There was a small hot spot ( 2" x 3") on the top of exhaust hose downstream of the riser (starboard) in a localized area not consistant with normal findings.
  2. importmonkey

    importmonkey Opinionated Member

    Jul 9, 2015
    Middle River, MD
    2007 44 Sundancer
    QSC 500s
    20170808_151233.jpg I use Gary at Cutter Marina. Excellent mechanic!

    Josh does work in our marina and is highly recommended, but I have not used him.
  3. ASDF

    ASDF Member

    Sep 18, 2017
    Thanks I'll check them out.
  4. QT1

    QT1 Active Member

    Oct 20, 2016
    Belair, MD
    1990 350 Sundancer, "Quality Time II". Avon rib w/ Yamaha 4 stroke. Upgraded Raymarine GPS/radar.
    7.4 Mercruisers
    I have a mobile mechanic who has done a great job for me and others at our marina. ND mobile marine repair, Neal , 443 907 0893 .

Share This Page

Show Sidebar