bait tank install

[TommyZ]

Hi everyone. I would like to mount a bait tank on my transom of my 1997 370 sundancer. I would remove it when I am not fishing. Do I have a raw water inlet or pump that I could hook my tank up to? I bought the boat about 4 months ago and I have not searched the bilge, but wanted to see if the boat came with one as a standard feature from sea ray

Thanks

Tom

 

[Hampton]

You might be able to splice off of the genset cooling or the air condit. On my 250 I drilled a hole and added a through hull will ball valve. Also a small pump and strainer.

Im not sure you can splice it but as long as you use high quality stuff and dont starve your other systems for cooling water it may work. Double clamp everything. Seek other advice. It would be a little redneck.

You would have to have shutoff valves and only have one open at a time. Probably better off drilling another hole in a designated spot.

 

[TommyZ]

can I put a through hull while the boat is in the water? I jsut did the bottom and don't need to pull out for two years?