floriduramax1
Active Member
- Sep 19, 2010
- 1,727
- Boat Info
- 280DA, Magic Tilt triple axle, 2006 GMC 2500 D/A
- Engines
- T4.3/ Alpha
Awesome solution!!!! Who did the bow eye relocate and fiberglass work?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Awesome solution!!!! Who did the bow eye relocate and fiberglass work?
Awesome solution!!!! Who did the bow eye relocate and fiberglass work?
I wish our eye was that low! We would not have this thread right now...lolBow eye has not been moved, although I admit the angle I took that pic from probably makes it look lower than it really is.
Do you have trouble with your anchor hitting now?
I solved my problem by cutting the winch stand down...
Mike, glad it worked out so well. I will probably do the same this winter. Keep this post going if you run into any problems.
Nicky
One issue I have is the anchor roller goes down to within an inch of where the anchor itself sits,so pulling the anchor does not make that much room for me. MM
remove the anchor i did it on mine quick disconnect