Access to Clarion Cmd4a Wiring

fdough1

New Member
Jun 21, 2015
63
Havre de Grace, Md, United States
Boat Info
2007 Sea Ray 340
Engines
2XMercruiser 8.1 Inboard
I just bought a 2007 340 Sundancer with the clarion cmd4a. It's located with the Ac and dc control panels in the salon.

I want to access the wiring at back of the unit. I look at the install manual and it shows how you remove the screws mounting the unit...I did that and the unit pulls out of the mounting hole about half way then won't come out any further. Seems like wiring is preventing it from coming all the way out.

any one successfully removed the cmd4a?

Thanks
 
Last edited:
oh this is unfortunate that nobody can help.. I am looking to do the same thing
 
Not familiar with your 340, but on my 280 the electrical panel is hinged above the radio, remove 2 screws and I can open the panel to access the back of the stereo, is that an option?
 
You have to unscrew the panel and drop it down. For some reason the wires are tie wrapped and the radio won't come out. I went through the same thing.
 

Forum statistics

Threads
112,950
Messages
1,422,862
Members
60,932
Latest member
juliediane
Back
Top