? about 230 CC

BigFish

New Member
Dec 2, 2007
21
Muncy, PA
Hey guys, I have a 1990 230 cuddy. Ive been researching, and it seems like these were supposed to have back to back seating in the driver and copilot area, and an engine cover with 2 jumpseats in the back. Mine doesnt. Its has bucket seats in front with a large engine hatch/sunpad/storage area and bench seat in the back. Am I wrong on the model, or did someone change this?
 
I looked at that last night, but like I said mine doesnt have the back to back seating, and it has a bench seat in the rear and the engine hatch has a sunpad on top of it. There isnt an engine box. You have to lift the hatch to get to the engine, it doesnt pull out and its 3 seperate pieces. middle one uncovers engine and 2 sides are storage and have false bottoms. One side has a place where the table sits and straps in.
 
BigFish,

You can always contact SeaRay with your HIN#. They would be able to tell you for sure.

I do know that earlier CC models had back/back seating, or you could get an SX or SXL that had seating as you describe.

Only SeaRay would know for sure.

BTW, how fast does she go w/454? Ride?

Gregg
 
Thats what I might have to do. Im drivin myself nuts trying to figure it out haha.
On a calm day on glass I can see 58 GPS. just cruisin right around 35. I had an 84 celebrity 188V before this and this ray blows that thing out of the water in terms of ride. I love it.

Thanks for the help guys.
 
Last edited:
Presentation, you nailed it. bucket seat option aft seating option, table, and a bunch of others. Thanks.
 
Last edited:
The cuddy cabins of that era used to have the chrome numbers on the side with the cc afterward. what does your have?

*************************
sorry not in chrome but in a decal below the side windows.
 
Last edited:
I think its the CC. First the OV has a bigger sink set up in front of the passenger seat. Second the OV has a wider beam of 102". The Pachanga doesn't have cabin windows and has 2 roof vents.

Take a looks at the spec sheet in the link above. The picture of the boat has different seating than the drawn diagram on the same sheet. Plus the boat is 17 years old. the owners could hav had some stuff redone. My
 
Presentation got it. If I understand what He showed me correctly, you could option them out different. Makes sense to me.
 
For whatever it is worth, I owned a 1990 210 bowrider with the configuration you describe. 2 bucket seats and a bench seat in the back. There was already a fairly good pad over the engine compartment. But the backrest of the bench seat folded forward. Three cushions were inserted over the bench seat, which made into a huge sunpad in the back; three sun-bathers wide. This was an optional configuration for this boat. Came standard with the back to back and jump seats in the back. Just sold it in '96. Got lots of compliments on that 210. Never have seen another like it.
 

Forum statistics

Threads
113,167
Messages
1,427,707
Members
61,078
Latest member
96SR40EC
Back
Top