a few pics of my winters works

[1956olds]

I redid my cocpit,and had a camper top made removed and rebedded hatches and side windows ,new carpet in and out am waiting for the decal for back of boat.

 

[billnpat]

I redid my cocpit,and had a camper top made removed and rebedded hatches and side windows ,new carpet in and out am waiting for the decal for back of boat.

VERY VERY NICE......CLEAN LOOK..:thumbsup:

 

[Tonka Boater]

Looks great! Nice job.
.

 

[1956olds]

Thanks ,i bought the aqua mat from great lakes skipper for about 100.00 and cut it myself and had it edged for the cocpit area,also got rid of the seat back pockets and replaced with ss grab handles.I will get some pics of the new interior soon .

 

[KRB64]

I want a 300WE...

Waiting on the interior pics

 

[Dasch Boat]

Looks great, IMO you should get some spacers to keep the eisenglass from contacting the stainless, you will get burn marks pretty quick if you don't. (been there done that on my 300 WE)

 

[tdschafer]

Looks very nice!! How do you fasten the sunbrella hatch covers? I have them with my boat but never installed them. Todd

 

[lime4x4]

I like the frt bimini top with the glass. that's what i want to do to mine. How do u keep the water from leaking in the lower front?

 

[OldSkool]

Very nice and clean. I like the glass inserts also. I'm getting ready to put a camper top on mine so I think I'll steal your idea and let the sun shine in.

 

[Dasch Boat]

Looks very nice!! How do you fasten the sunbrella hatch covers? I have them with my boat but never installed them. Todd

On my 300 WE the snaps were installed at the corners of the hatch when the boat was delivered new. Do your covers have snaps ?

 

[tdschafer]

On my 300 WE the snaps were installed at the corners of the hatch when the boat was delivered new. Do your covers have snaps ?

I dont thimk so. I will check this week. I think when I looked at them last year they have some material @ each corer that could be intended for the snaps.
Todd

 

[1956olds]

the hatch covers snap down at the corners and the larger one has 4 extra snaps in the center of each side.the front eisenglass has sunbrella around it the top edge has a three inch flap across the zipper area and the bottom snaps to the windshield frame on the outside so it dosent leak .I have some covers for the stainless to keep the bows from the glass they are the old top color though made of sunbrella also ,i am making a new set that will match the newe side carpet i installed on the gunnels,it will have sewn on velcrfo strips and have some give for grip and softness.Going to the boat today for a few hours will try to get more pics thanks guys .

 

[1956olds]

View attachment 10172

View attachment 10173

View attachment 10174

View attachment 10175

View attachment 10176Ok shes a bit out of sorts but heres some more pics.I finished the stereo install today,i needed a remote with it so i could operate it from the helm.I still need to remove the tv foot ,its on an articulating arm and just lifts off for storage while under way.

 

[NorCal Boater]

I want a 300WE...

Waiting on the interior pics

How bad do you want one? I have looked at this one and it mostly needs TLC and a survey. The sweet and unique thing about this one is it has 7.4L big block straight inboards.

http://towerparkboatsales.com/core/listing/pl_boat_detail.jsp?&units=Feet&id=1705457&lang=en&slim=broker&&hosturl=towerpark&&ywo=towerpark&

They are dreaning on the price and they have had the boat since last year but the BB makes it a bit unique. PM sent.

 

[KRB64]

Easy to want, hard to justify and harder to afford. We've got three now and I can hardly manage to even use one...

That model looks to have it all - room, looks, storage, lines, power, etc.

I like all the use of space for storage topsides, like in the transom, etc.

 

[jcoyrochny]

Where did you get the camper top done and if you do nt mind, how much did you spend on it?

 

[1956olds]

Had Kens in Linwood Michigan do the canvas,i already had the frame . $2100.00,would have been 2950 if he built a new frame but i found a used one on craigslist for 80.00 and a drive to st clair shores ,stainless steel too!