9x9 Trim Tab Kit for Boston Whaler 20 Outrage

jason78

Active Member
TECHNICAL Contributor
Sep 3, 2008
3,662
Fort Mill, SC / Lake Wylie
Boat Info
1997 20 Outrage
Engines
200 Merc Offshore
Tom,

I am considering a set of Tabs for my 1997 Boston Whaler 20 Outrage. I believe the boat had Bennett 9x9 Trim tabs as an available factory option; not sure if you can verify that or not. So I am assuming this is the best size for my boat. I am going by the 1998 Parts Guide. I think 1997 was the year Brunswick bought Whaler so 1997-down literature is not available online.

Anyhow, I was wondering if a 9x9 Trim Tab kit is still available from Bennett. There is a tapered spot in the transom on each side just above one of the chines. I believe that must be for tab placement. Any help would be appreciated.

Thanks
Jason
 
Jason,

The 9 x 9 was likely a custom Trim Tab that we built to Boston Whaler's design. If it is at all possible I would recommend larger ones. Also since the 9 x 9 was built only for Whaler you will not be able to buy them "off the shelf" and that will really drive the cost up.

Can you take a picture of your transom and post it? That would really help to determine the best way to proceed.

Tom
Bennett Marine
 

Forum statistics

Threads
113,186
Messages
1,428,188
Members
61,098
Latest member
Klawson83
Back
Top