99 210 Signiture Bowrider
- Thread starter SeaVette
- Start date
Tabman
Member
Jerry,
I'm not too familiar with the 210's transom design so I took a look on the internet. I found this photo:
Does this look like your boat?
If so I would install a set of 10" x 12" M120 Sport Tabs.
The actuators (rams) would mount up to the overhang on the transom like these photos:
The M120s would be a perfect size for your 210 and would give very good control over a broad range of speed, weight distribution and sea conditions.
Let me know if this looks like your boat.
Tom McGow
Bennett Marine
I'm not too familiar with the 210's transom design so I took a look on the internet. I found this photo:
Does this look like your boat?
If so I would install a set of 10" x 12" M120 Sport Tabs.
The actuators (rams) would mount up to the overhang on the transom like these photos:
The M120s would be a perfect size for your 210 and would give very good control over a broad range of speed, weight distribution and sea conditions.
Let me know if this looks like your boat.
Tom McGow
Bennett Marine
SeaVette
New Member
- Sep 29, 2009
- 20
- Boat Info
- 1999 210 BR follows behind a 05 Tahoe SOLD
Now have 2008 205 Sport
- Engines
- 5.0 L EFI
Tom, Sorry this is not even close to what I have. 1999-2001 was a new hull design. I will take a picture and send to you. Is the address to Bennett Marine posted anywere on CSR? I cannot post a pic. so I will send. Thanks Jerry