89 340 DA - Need help identifying fuse sizes

[Ky Tundra]

I tracked down a bad fuse in the panel to the right side of the helm. The panel isn't labeled and I haven't removed all of the fuses in the panel yet to track down what each controls. When I do this I want to double check that each circuit has the right size fuse. There are also a couple of missing fuses. I assume they could be just unused spots because everything seems to be working, but again, just trying to double check.
Does anyone have a diagram? Is there a way to check what size each circuit should have? Any rule of thumb on wire gauge vs. fuse size?
Thanks for your help.

 

[Pyrojodge]

If you don't have your owners manual I'd contact Sea Ray and get one... pretty painless from what I understand. I think there is a diagram of the fuse panel in the manual with appropriate sizes and uses.

http://www.searay.com/page.aspx/pageid/162289/Owners-Resources.aspx#Resources

good luck!

Jason

 

[Ky Tundra]

If you don't have your owners manual I'd contact Sea Ray and get one... pretty painless from what I understand. I think there is a diagram of the fuse panel in the manual with appropriate sizes and uses.

http://www.searay.com/page.aspx/pageid/162289/Owners-Resources.aspx#Resources

good luck!

Jason

Yes, checked the manual. It describes the panel but doesn't actually have a diagram.