500/520 DB official thread

Thanks Tom. That rings a bell. Yes, my MFD's are now Raymarine 120 hybrid touch displays. Mike
 
Last edited:
Has anyone had a bridge cover made for their 52 sedan bridge? I had one made for my Meridian 411 and really liked it. We do not like the glass up but would still like to be able to keep the rain out of the bridge. Just want to see if anyone has any pictures of how they did it.
 
Morning Gents. 35 and rain/snow this morning, but we are splashing Friday damn it! Should be 60's then. Anyhow, maybe a silly question. Does anyone (or is it OK) to run washer/dryer while underway? No, I'm not making her do laundry while travelling :p, just start the machine before departure, and have the cycle done after arrival.
 
Charlesoceanone said:
Has anyone had a bridge cover made for their 52 sedan bridge? I had one made for my Meridian 411 and really liked it. We do not like the glass up but would still like to be able to keep the rain out of the bridge. Just want to see if anyone has any pictures of how they did it.
Click to expand...
I don’t see why you couldn’t have one made. I used a cockpit cover for the cockpit of my 340DA almost all summer long. The space is about the same as the bridge of the 520
 
Just that covers the instrumentation. Is that what you are looking for, or the entire bridge?
Mike
 
Charlesoceanone said:
I’m looking for the entire bridge. I have a concept of what I want I’m just checking to see if someone has a better idea here. Don’t want to reinvent the wheel.
Click to expand...
I'm interested solely from the aspect to knock the sun heat down on the bridge. I have my canvas person looking for a small track that can mount outside of the enclosure and up under that overhang and have a means to pull a light sun break fabric through it to enclose the bridge. We have found nothing suitable yet...
 
Ours never comes
Off with AC and 3 panels that we can open I don’t see
The reason to go through the work
Of removing it
.
 
I have 3 panels that open as well. One rigid EZ2CY panel centered ln the front that swings up and buttons to the bottom of the hardtop and the 2 panels in the back are isinglass and roll up.
 
82D350A0-314B-404A-BE0C-4201122F5CDA.jpeg
My front panel has the window with a wiper which I really like so I would have to look at the side and rear panels
 
Charlesoceanone said:
Has anyone had a bridge cover made for their 52 sedan bridge? I had one made for my Meridian 411 and really liked it. We do not like the glass up but would still like to be able to keep the rain out of the bridge. Just want to see if anyone has any pictures of how they did it.
Click to expand...

Not a Sea Ray but I like this design.
bridge cover.jpg
 
Renaming ceremony complete. Aim High is in the water. Admiral is hammered...

We met while in the Air Force, married in an Air Force chapel. And, as a dentist, if you miss a nerve block, you need to “aim high”

The 320 is in the background.
 

Attachments

  • 044A5D6D-27BF-4D29-B17C-1D01EFD584E2.jpeg
    044A5D6D-27BF-4D29-B17C-1D01EFD584E2.jpeg
    193.8 KB · Views: 147
spikedaddy99 said:
Renaming ceremony complete. Aim High is in the water. Admiral is hammered...

We met while in the Air Force, married in an Air Force chapel. And, as a dentist, if you miss a nerve block, you need to “aim high”

The 320 is in the background.
Click to expand...
Looks great. Nice story to the name.
 
You must log in or register to reply here.

Forum statistics

Threads
113,120
Messages
1,426,613
Members
61,037
Latest member
wojozobl
Back
Top