Sundancer123
New Member
noticed boattest.com doesnt have a reviews of the 48 sundancer...
anyone know of videos out there hiding
anyone know of videos out there hiding
48 Sundancer review video?
- Thread starter Sundancer123
- Start date
Deleted
Sundancer123
New Member
thanks really need the 48 video not the 45
Rich122
Member
- Aug 7, 2007
- 295
- Boat Info
- '10 540DA, t/t:Amanzi350-40hp
Raymarine G150s HD MFDs/48kw Radar/DSM300 Sounder
- Engines
- Cummins QSC8.3-600s
Pod Drive/Skyhook
21.5kw Onan
Not sure what your looking for in the test but here's a few figures from my 48DA
Boat full options, full water, fuel, 2 people and gear, and provsions for a live aboard. No lift, but dink (WM310/ 9.9hp 4sk) on Hurley.
90% throttle-80% load 28knts 41gph
80% throttle-72% load 24knt 36ghh
If you and steadily bring up the rpms you can get on plane with no tabs and very minimal bow rise, and never loose your forward vision. If you tab down, and follow above, there's no bow rise. If you just punch it, without tabs she'll lift. It's a dancer so noise level is a little higher, but you can still carry on conversation without shouting. Tracks straight. Turns in about 2.5 boat lengths.
ER: Tight but not impossible. The things you would typically service (Racor's, raw water impellers,fiters, strainers, and batteries) are all within easy reach.
The fit and finish is typical top notch Sea Ray quality.
Rich
Boat full options, full water, fuel, 2 people and gear, and provsions for a live aboard. No lift, but dink (WM310/ 9.9hp 4sk) on Hurley.
90% throttle-80% load 28knts 41gph
80% throttle-72% load 24knt 36ghh
If you and steadily bring up the rpms you can get on plane with no tabs and very minimal bow rise, and never loose your forward vision. If you tab down, and follow above, there's no bow rise. If you just punch it, without tabs she'll lift. It's a dancer so noise level is a little higher, but you can still carry on conversation without shouting. Tracks straight. Turns in about 2.5 boat lengths.
ER: Tight but not impossible. The things you would typically service (Racor's, raw water impellers,fiters, strainers, and batteries) are all within easy reach.
The fit and finish is typical top notch Sea Ray quality.
Rich
wetpaint
Active Member
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/_TwmDwIwr90&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/_TwmDwIwr90&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
