370 sundancer Helm seat

Clutch1956

New Member
Jul 27, 2017
13
Boat Info
Sea Ray 1997 370 SD
Engines
7.4 mpi
I have a 1997 Sundancer 370 and looking to replace the power seat on the helm's starboard side. Would anyone have any leads on where/if anyone sells or repairs them. They were made out of plywood and it is now falling apart. uggg

Thank you for any and all help.
Bob
 
Last edited:
I repaired my own by taking it off the boat, taking the seats apart and rebuilding the plywood based with a very dense marine plywood. I think. I have seen others who have done so using starboard. You just need to be a little handy with disassembling them, I even reused the foam and the vinyl.

Check out the ‘odds and Ends’ section of the 370Sundancer.com website.
 
I repaired my own by taking it off the boat, taking the seats apart and rebuilding the plywood based with a very dense marine plywood. I think. I have seen others who have done so using starboard. You just need to be a little handy with disassembling them, I even reused the foam and the vinyl.

Check out the ‘odds and Ends’ section of the 370Sundancer.com website.
Good to see you around Gene, hop all is well.
 

Forum statistics

Threads
112,950
Messages
1,422,861
Members
60,932
Latest member
juliediane
Back
Top