the breaker is ON on the genny?Actually I went today and did it myself because he wasn't available. Everything working fine but can't start Genny from salon panel, have to figure that one out. Again, thanks alot man!!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
the breaker is ON on the genny?Actually I went today and did it myself because he wasn't available. Everything working fine but can't start Genny from salon panel, have to figure that one out. Again, thanks alot man!!
On the panel above TV yesthe breaker is ON on the genny?
on the genny, there is a breaker tooOn the panel above TV yes
Thank you, I will check that one todayon the genny, there is a breaker too
But when it's working it's pretty damn awesome!!Hope it works out for you! The horror stories of the electronics kept us away.
Best of luck!
Bennett
I did not have a auto pilot on this boat, sorryHey John-John, Do you remember the power up sequence for the old ray marine e-120 and ray marine auto pilot? On the main eplex screen above TV do I have to select bridge switch? I can't seem to power it up with just the bridge accessory switch, I'm used to the newer garmin products. Thanks in advance, and remember this bridge was torn down for transport
Help! Just purchased a 2008 360 DB.
1. Is there a way to remove the dimmer feature for the external lights controlled by the two sets of rocker switches that turn on the hull, cockpit, overhead (on radar arch), "entry" or "bridge" lights? The dimming feature is not compatible with my multicolored LED replacement bulbs.
2. How to remove the black tv cabinet in the aft cabin so I can replace the tv and DVD player. I removed the eight screws and it wouldn't budge, and I can't find an access panel to get to the back of the cabinet.
3. Supposedly my boat has a central vac, but I don't see a switch or any controls or canister. It came with a vac hose, and there is an outlet attachment for the hose in the aft cabin.
4. My boat did not come with Autopilot, but it has the Autopilot rocker switch at the helm. If I have Autopilot installed, can it be powered on using that rocker switch and its corresponding module? Or does the module have to be programmed to power up when the rocker switch is pressed?
Thanks in advance for your help!
John, It wasn't the genny breaker, someone had the auto/red switch off or to the left, works great now.....lolthe breaker is ON on the genny?
Anyone have part #'s for LED light bulbs in the cabin of the 36DB? I changed all to LED in my 280DA because those factory bulbs put out heat like crazy and we don't do heat in the Sunshine State!!
Yes, and thankyou, all leds installed nowSorry for delay in responding - For some reason I haven't been receiving notifications on this string. Did you see my post from 9/11/2018 on this string where I listed all the LED's? I fully converted last year.