340 Cockpit Table

Discussion in 'Modifications/Customizations' started by DaleM, Apr 16, 2018.

  1. DaleM

    DaleM Member

    619
    Aug 5, 2009
    Mt Airy, MD
    340 Sundancer
    Twin 8.1 Horizons
    Does anyone know off the top of their heads the dimensions of the standard cockpit table that comes with the boat? I forgot to measure it this weekend. I'm in the process of making a new teak table to replace it with but still want the ability to store it in the bracket under the engine cover.

    Thanks!

    Dale
     
  2. KevinC

    KevinC Active Member

    674
    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives
    Cockpit table on my 2004 340SDA is 35" x 19". Just measured it because we were thinking of having a Corian table cut. Looking at the mount you could probably go to 36" or even close to 38" if you are willing to move the bracket from the inside of the support to the outside. Keep in mind if you plan on using it to support the filler cushion it would more than likely need to be the same shape.

    -Kevin
     
  3. DaleM

    DaleM Member

    619
    Aug 5, 2009
    Mt Airy, MD
    340 Sundancer
    Twin 8.1 Horizons
    Thanks Kevin. I totally forgot that it acted as a filler. We rarely make up the lounge but I’d still like to keep that as an option. We might move the cockpit table to downstairs, or just stow it in the rack until we need it.
     
  4. KevinC

    KevinC Active Member

    674
    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives
    Let me know what you wind up doing about the table - I am not 100% sold on the Corian but it is part of my cockpit upgrade plan. I am replacing the sink and faucet along with a new counter and was thinking about having them match. My table is a little warped and makes it difficult to keep plates and drinks on without wobbling. I was planning on keeping the old table for the filler just in case but store it off the boat.

    -Kevin
     
  5. Jon Paul

    Jon Paul Member

    68
    Sep 24, 2013
    Phoenix
    2006 Sundancer 340
    8.1 V drives
    I had a custom teak one made exact same dimensions of original.
     
  6. KevinC

    KevinC Active Member

    674
    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives
    Any pictures and ballpark costs ?

    -Kevin
     
  7. The Bill Collector

    The Bill Collector Well-Known Member SILVER Sponsor

    Jun 2, 2008
    Tacoma, WA
    450 Sundancer
    3126 Cat's
    2011-05-25_17-18-38_838.jpg
     
    KevinC likes this.
  8. KevinC

    KevinC Active Member

    674
    Feb 25, 2011
    Long Island, NY
    2004 340 Sundancer
    1988 Proline Center Console - 90hp Mariner/Mercury
    1969 Boston Whaler
    Twin 8.1 V-drives
  9. The Bill Collector

    The Bill Collector Well-Known Member SILVER Sponsor

    Jun 2, 2008
    Tacoma, WA
    450 Sundancer
    3126 Cat's
    Thanks Kevin... compliments of my brother in law.
     
  10. M Prod

    M Prod Active Member SILVER Sponsor GOLD Sponsor

    251
    Oct 6, 2017
    North Vancouver, BC
    2005 Sundancer 340
    Aquapro Dinghy w/ Honda 8hp
    Kohler 5KW Genny
    Raymarine Electronics
    8.1 Horizons /V Drives
  11. The Bill Collector

    The Bill Collector Well-Known Member SILVER Sponsor

    Jun 2, 2008
    Tacoma, WA
    450 Sundancer
    3126 Cat's
    Hey Mike, I felt the same way... You have $100k to $999k boat and they put a 2-bit plastic/fiberglass POS table on it. It is an insult. There I feel much better now...lol
     
  12. Jon Paul

    Jon Paul Member

    68
    Sep 24, 2013
    Phoenix
    2006 Sundancer 340
    8.1 V drives
    I will look to see if I have any photos here. If not I will have to get next time at boat. I was lucky to have am Amish wood worker around here and he charged about 300.00. Very good workmanship. He used my old table as a template to make the new one. JP
     
  13. Boater420

    Boater420 Active Member

    903
    Mar 11, 2015
    Clearwater, FL
    '97 330 Sundancer
    V-Drives
    Westerbeke 4.5BCG
    Twin Merc 454's
    Now that's a first world problem for sure! :)
     
    The Bill Collector likes this.

Share This Page

Show Sidebar