310 Sundancer Thread (2007 & newer)

Discussion in 'Sport Cruisers' started by hoard, May 21, 2010.

  1. Martin777int

    Martin777int New Member

    22
    Aug 18, 2019
    Dania Beach, Florida
    2008 Sundancer 310
    350 MAG Horizon V Drives
    Thanks for the reply. I am hoping there is wiring, if not thats fine too. Appreciate the response, take delivery in a few weeks!
     
  2. stephenm27

    stephenm27 Active Member

    299
    Nov 3, 2009
    Milton, GA
    2009 310 Sundancer
    350 MAG Mercs/B3 x 2 (Axius Premier)
    Great to see another local 310 Sundancer on here. We keep ours at the house (we trailer it) but usually put in at Mary Alice Park, adjacent to Bald Ridge. This is our 4th season with the 310 and I think I've nearly gotten all the gremlins worked out, or at least the most annoying ones. Seemingly there's always another boat project...

    Hope to see you out on the lake--
     
  3. Martin777int

    Martin777int New Member

    22
    Aug 18, 2019
    Dania Beach, Florida
    2008 Sundancer 310
    350 MAG Horizon V Drives
    2008 310 350 Mag Horizon V drive: no bilge layout in the owners manual (only gas stern drive and diesel.)

    Just curious if someone knows of a SeaRay drawing for this configuration. Not much different it seems but general location, etc a bit different. I want to know specific locations for shut offs, seacocks, etc. Thanks.
     
    Luna Sea likes this.
  4. tlrlc

    tlrlc Member

    208
    Sep 13, 2013
    Long Island, NY
    2007 310 sundancer
    mercury 6.2 horizon x 2
    vdrive/bow thruster
    I have 6.2 mercury horizon v drive with generator but don’t have a drawing.you want to know something specific ?
     
  5. Martin777int

    Martin777int New Member

    22
    Aug 18, 2019
    Dania Beach, Florida
    2008 Sundancer 310
    350 MAG Horizon V Drives
    Just looking for a reference of what’s what and where! We haven’t taken delivery yet, just getting ready. I’m guessing the stern drive drawings are close enough...
     
  6. Boater71

    Boater71 Member

    163
    Mar 5, 2018
    Boston, MA
    2008 Sea Ray 310 Sundancer
    MX6.2 MPI Bravo III DTS with Axius and SeaCore
    Kohler Genset
    Go to the searay website, click on owner resources top left and download the manual for the boat. it has all the drawings you are looking for.
     
  7. JohnS

    JohnS New Member

    8
    May 1, 2014
    Long Island, NY
    2007 310 Sundancer
    350 Mag MPI Horizons FWC
    V drives
    New issue. My cabin "head liner" (if that's what it's called) seems to be separating from the hatch and the skylights - about a half inch to inch. I'm looking to head off a bigger issue down the road. Would anyone have recommendations? I'm thinking some 4200/5200 between the hatch frame and the liner, and the skylights and the liner. Would rather not get involved in removing and resetting whole thing, and not sure how that would be done either. Any suggestions appreciated.
     
  8. Brando99

    Brando99 Member GOLD Sponsor

    48
    Feb 18, 2014
    Canyon Lake, Texas
    2009 Sea Ray 310 Sundancer, C80 MFD, Kohler 5K Generator, Axius
    Twin 350's w/Bravo 3's
    Need some help: My Smartcraft display sea temperature reads 180 degrees. everything else seems to be working (speed and depth) Could the transducer be bad? I don't really want to do a factory reset on it if I don't have to. The model number on the transducer is: 88828A22 with a 20 degree tilt. I will also be calling Mercury tomorrow to hopefully give me some advice. The transducer is connected to the starboard engine

    IMG_1731.JPG IMG_1734.JPG IMG_1746.JPG IMG_1748.JPG IMG_1749.JPG
     
  9. JimT

    JimT Well-Known Member SILVER Sponsor

    Jul 7, 2009
    Charlotte, NC- LKN
    2010 330 Sundancer
    T-350mags w/BIIIs & Axius, 5.0 kw Kohler
    I would not go with anything as permanent as 4200 or 5200 or you will never be able to peel it back again. I would go with some kind of contact adhesive. You can probably get a spray can.
     
  10. stephenm27

    stephenm27 Active Member

    299
    Nov 3, 2009
    Milton, GA
    2009 310 Sundancer
    350 MAG Mercs/B3 x 2 (Axius Premier)
    The foam-backed vinyl headliner is affixed to a plywood substrate which is attached to the fiberglass with screws.

    Is your issue that the vinyl is separating from the plywood, or has the plywood detached from the fiberglass?
    This distinction would dictate the course of action--but both suggest you may have water intrusion in these areas that probably should be addressed first?
     
  11. stephenm27

    stephenm27 Active Member

    299
    Nov 3, 2009
    Milton, GA
    2009 310 Sundancer
    350 MAG Mercs/B3 x 2 (Axius Premier)
    Unfortunately, I can't answer the question, but I can say that mine reads the same. All other functions also work (including depth).

    If you end up getting any info from Mercury on how to resolve, there are probably others here that would appreciate hearing what you find out. I certainly would...
     
  12. tlrlc

    tlrlc Member

    208
    Sep 13, 2013
    Long Island, NY
    2007 310 sundancer
    mercury 6.2 horizon x 2
    vdrive/bow thruster
    i would be interested in the fix as well, i have the original vesselview but have the same readings.
     
  13. Boater71

    Boater71 Member

    163
    Mar 5, 2018
    Boston, MA
    2008 Sea Ray 310 Sundancer
    MX6.2 MPI Bravo III DTS with Axius and SeaCore
    Kohler Genset
    I have an issue of the SmartCraft restarting and port tank "Fuel sender issue". I called support and the answer was do either a sensor scan, which is in setting, however, I could not find it "scan". The other suggestion was a factory reset, which apparently was performed by the MM techs, did not resolve any of the issues.

    hope this helps, Please post solution if found. thanks.
     
  14. Boater71

    Boater71 Member

    163
    Mar 5, 2018
    Boston, MA
    2008 Sea Ray 310 Sundancer
    MX6.2 MPI Bravo III DTS with Axius and SeaCore
    Kohler Genset
    Starboard actuator making a loud sounds/noise. If it fails, can i just use the middle actuator to lift for ER access? Expensive to replace?
     
  15. JohnS

    JohnS New Member

    8
    May 1, 2014
    Long Island, NY
    2007 310 Sundancer
    350 Mag MPI Horizons FWC
    V drives
    Thank you. I’ll have to investigate further next time I’m at the boat
     
  16. Martin777int

    Martin777int New Member

    22
    Aug 18, 2019
    Dania Beach, Florida
    2008 Sundancer 310
    350 MAG Horizon V Drives
    Hi all...2008 310DA. Are we a nmea2000 boat or a 183? Still looking for the info in the owners manual.

    I’m starting to research upgrades, etc.

    Thanks To all.
     
  17. Martin777int

    Martin777int New Member

    22
    Aug 18, 2019
    Dania Beach, Florida
    2008 Sundancer 310
    350 MAG Horizon V Drives

    Thanks for the response!

    Found my questions in the 2007 Owners Manual. Seems SR couldn’t bother to put it in the 2008 manual. WTF?
     
  18. Martin777int

    Martin777int New Member

    22
    Aug 18, 2019
    Dania Beach, Florida
    2008 Sundancer 310
    350 MAG Horizon V Drives
    Hi all.

    Vacu-flush not working (maybe operator error!)

    Manual says turn on water system breaker in cabin (check) and turn on “Waste Sustem” breaker in cabin (check.)

    Nothing. Water comes in, no vacuuming. Nada.

    The key switch by the head, not required to be “On?”

    Any tips would be appreciated!!
     
  19. tlrlc

    tlrlc Member

    208
    Sep 13, 2013
    Long Island, NY
    2007 310 sundancer
    mercury 6.2 horizon x 2
    vdrive/bow thruster
    Key in head must be ON to operate
     
  20. Martin777int

    Martin777int New Member

    22
    Aug 18, 2019
    Dania Beach, Florida
    2008 Sundancer 310
    350 MAG Horizon V Drives
    Great. Thanks. No manual with the boat, I’ll get one ASAP.

    So:

    Waste System breaker ON
    Water System breaker ON
    Key in head to ON.

    Sounds simple, even a caveman may be able to do it!
     

Share This Page

Show Sidebar