310 Sundancer Thread (2007 & newer)

Discussion in 'Sport Cruisers' started by hoard, May 21, 2010.

  1. hoard

    hoard New Member

    54
    Aug 11, 2008
    Cumming, Georgia
    2008 310 Sundancer
    Twin 350 Mags DTS
    Has anyone had to replace the door on the Isotherm pull out fridge? My hinges broke when my little ones pulled the tray out and the weight pushed the door down. Haven't looked into a replacement yet - just wondering if anyone else has had this issue.
     
  2. rwf

    rwf Member

    232
    Oct 16, 2010
    Boston, MA
    2008 310 Sundancer, Raymarine C80 GPS/Radar
    350 Mag MPI DTS SeaCore w/Bravo IIIs
    Yep, that was the problem. Low voltage in the cabin; look here for the problem and fix with pictures: http://clubsearay.com/showthread.php/45146-Low-cabin-DC-voltage. If your cabin CO detector blinks slow green and feeps every 30 seconds, that means low voltage; you might want to check out this thread.

    Once fixed, my Isotherm CR 36 drawer frosted over in less than a minute. It works like it should now. Anyone else with a wimpy drawer may want to check out their cabin voltage too.
     
  3. rme78

    rme78 New Member

    6
    Jan 28, 2011
    Lake Minnetonka
    310 Sundancer 2008
    Mercruiser w/ Axius
    I am also having issues with my generator and Err 62. I was told 62 means lack of water supply to the generator. I cleaned the filter and opened the sea cock to see if water is coming through. I am getting a good supply of water but still receiving this error.

    Anyone find anything on this?
     
  4. bridanad

    bridanad New Member

    17
    Jul 3, 2011
    Haverstraw, NY
    2008 Sea Ray Sundancer
    350 Mercruiser w/BIII Drives
    Have a 2008 310 DA. Just found a couple of hidden compartments: Behind the forward cushion on the bed and behind the cushion on the starboard side. What else is there?
     
  5. Bugsy24

    Bugsy24 Active Member

    Jun 25, 2010
    Freehold, New Jersey
    2008 310 Sundancer
    T-350 Mag,Br3's W/Axius
    We did an over night down in Forked River. Watched the Lacey Lights Boat Parade. On the return home before we left the dock, we noticed a pooling of water in the rear cabin floor? Carpet in the back was soaked!! Will go back tomorrow with a shopvac. Now it really hasn't rained here much, but noticed a couple of weeks ago that water would drip in the sliding cabin door when it rained. Anyone have a problem like this or suggested Culpret?
     
  6. JimG

    JimG Well-Known Member SILVER Sponsor

    Nov 4, 2008
    Southern WV
    2007 310 DA
    Kohler 5ECD
    Twin 350 Mags
    Raw Water Cooled
    V-Drives
    I have the EC62 now... I am going to change my impeller this weekend and see if it fixes mine. :huh:
     
  7. skolbe

    skolbe Active Member

    Oct 3, 2006
    St. Louis, MO
    320 Sundancer, Mercury 310 Sport Inflatable Tohatsu 6HP
    350 Mag V-Drive - Kohler 5ecd
    I have a Kohler 5ecd on my 320. I have found the following issue. The Sea Cock for the generator has an elbow with a 90 degree bend at the top. I have found that it gets clogged right there in the elbow very easily and I have to fish a coat hangar in there. Otherwise - I get the generator shutting down with the error code.
     
  8. Bugsy24

    Bugsy24 Active Member

    Jun 25, 2010
    Freehold, New Jersey
    2008 310 Sundancer
    T-350 Mag,Br3's W/Axius
    Just got back from Wally World and they have the Sump Pump and the Mid Cabin Bilge Pump and Float Switch at a Huge Discount! I suggest you guy's get some back ups cause they're only Guaranteed for three years and I've already replaced the Sump!!
     
  9. tbirdvet

    tbirdvet Active Member

    Sep 24, 2009
    Michigan
    Previous boat: 2008 330 Sundancer
    Vetus Bow Thruster
    Kohler Gen.
    Twin 496 MAG, 375HP Bravo III,
    Check your head sump in the floor. May be full and not pumping out.
     
  10. Bugsy24

    Bugsy24 Active Member

    Jun 25, 2010
    Freehold, New Jersey
    2008 310 Sundancer
    T-350 Mag,Br3's W/Axius
    Thanks John already sorted out!! :thumbsup:
     
  11. tbirdvet

    tbirdvet Active Member

    Sep 24, 2009
    Michigan
    Previous boat: 2008 330 Sundancer
    Vetus Bow Thruster
    Kohler Gen.
    Twin 496 MAG, 375HP Bravo III,
    Did this fix your problem? I just got the same EC62 and unit shut down.
     
  12. JimG

    JimG Well-Known Member SILVER Sponsor

    Nov 4, 2008
    Southern WV
    2007 310 DA
    Kohler 5ECD
    Twin 350 Mags
    Raw Water Cooled
    V-Drives
    Yes it did... I should have reported earlier.
     
  13. Glen

    Glen New Member

    46
    Apr 11, 2008
    Alabama
    310 Sundancer 2008 Axius
    Twin Bravo III's
    Hoard,
    I did! The hinge was cracked and it was replaced under warranty. The new one is the same design???
     
  14. rwf

    rwf Member

    232
    Oct 16, 2010
    Boston, MA
    2008 310 Sundancer, Raymarine C80 GPS/Radar
    350 Mag MPI DTS SeaCore w/Bravo IIIs
    This is obscure. Does anyone know how the NMEA port on the chartplotter is normally wired? I have a 2008 310 Sundancer.

    I'm thinking of adding a fluxgate compass so the rest of the radar functions will work right (like radar overlays and MARPA). This compass could do it at reasonable cost: http://www.google.com/products/cata...=xF3hTvD3C6Pn0QGMsMijDQ&sqi=2&ved=0CHEQ8wIwAA

    It uses old NMEA (0183). So, depending on how things are hooked up already, I may need a multiplexor also, not just the compass. Or a NMEA 2000 converter and a bunch of connectors.

    Anyone know, or do I wait 'till spring to take it apart?

    I DID say it was an obscure question...
     
  15. MIKA II

    MIKA II New Member

    23
    Nov 26, 2011
    FPYC, Grimsby, Ontario
    310 Sundancer 2009, Raymarine C80-Radar/Chartplotter/GPS, 8'6" Zodiac Zoom with 6 hp Tohatsu
    MerCruiser® T-350 Magnum MPI Bravo® III DTS* (T-300 hp - 224 kW) w/ Axius
    gndrvr,

    We are new owners of a 2009 310 Sundancer and will take possession of it this spring. We are looking into replacing the slant back canvas and going to a full camper. Would you be able to post or email some pics of you canvas, specifically the stainless steel support rails and where they are positioned?

    Thanks,

    MIKA II
     
    Luna Sea likes this.
  16. Bugsy24

    Bugsy24 Active Member

    Jun 25, 2010
    Freehold, New Jersey
    2008 310 Sundancer
    T-350 Mag,Br3's W/Axius
    Unfortunately Sea Ray did not make a Camper Back for your year and model!! I went through this last year and research the Sh!t out of it. You can get a Canvas guy to make one for you but it won't be Cheap!! Great Lakes Canvas is the OEM for Sea Ray and since Sea Ray didn't offer the Camper as an option they won't make one. It supposedly has to do with Exhaust Backdraft while the Camper is up!
     
  17. JimG

    JimG Well-Known Member SILVER Sponsor

    Nov 4, 2008
    Southern WV
    2007 310 DA
    Kohler 5ECD
    Twin 350 Mags
    Raw Water Cooled
    V-Drives
    I may have one made for my 310 one day... I sure miss it.

    Congratulations on the new boat! Welcome to CSR!
     
  18. Bugsy24

    Bugsy24 Active Member

    Jun 25, 2010
    Freehold, New Jersey
    2008 310 Sundancer
    T-350 Mag,Br3's W/Axius
    I almost did it but it changes the look of the Boat!!
     
  19. MIKA II

    MIKA II New Member

    23
    Nov 26, 2011
    FPYC, Grimsby, Ontario
    310 Sundancer 2009, Raymarine C80-Radar/Chartplotter/GPS, 8'6" Zodiac Zoom with 6 hp Tohatsu
    MerCruiser® T-350 Magnum MPI Bravo® III DTS* (T-300 hp - 224 kW) w/ Axius
    Thanks, I will post pictures of the new boat in April when we take possession. In the meantime,I will continue my search for camper tops.

    MIKA II
     
  20. tobrie7

    tobrie7 New Member

    21
    Oct 22, 2009
    Catawba Island, OH
    2014 260 Sundancer
    350 MAG
    Anyone do a replacement for their TV's on an '07? My LG's have analog tuners and I would like to update. Seems better to replace that try and splice in a separate digital tuner box and prices are pretty cheap on LED flat screens. Just wondering what I will be getting myself into with the fit/finish in the main salon as the trim and vinyl are fitted to the LG.
     

Share This Page

Show Sidebar