280 new camper install

Discussion in 'Sport Cruisers' started by Mcole1170, Sep 8, 2018.

  1. Mcole1170

    Mcole1170 Member

    74
    Jul 24, 2017
    Long island
    2006 sundancer 280
    4.3 alpha
    hi all. Does anyone have pics or directions for installing the camper support poles. Instructions say outside of edge of non skid on one side and behind non skid on the other. Kinda have an idea but one already installed will help. Thanks
     
  2. stg099

    stg099 Active Member SILVER Sponsor

    196
    Jun 30, 2013
    Chicago
    2004 280 Sundancer
    4.3 Mercs/Alpha
    I will be at the boat later this morning and can take a few pictures of mine for you if that helps.

    John
     
    techmitch likes this.
  3. Mcole1170

    Mcole1170 Member

    74
    Jul 24, 2017
    Long island
    2006 sundancer 280
    4.3 alpha
    That would help tremendously. Thanks.
     
  4. stg099

    stg099 Active Member SILVER Sponsor

    196
    Jun 30, 2013
    Chicago
    2004 280 Sundancer
    4.3 Mercs/Alpha
    814F637D-85B4-407B-A0F0-20ED7300C941.jpeg 2EB07850-CBC7-4877-A85B-6DD28FC37E00.jpeg F317B8F4-C903-423A-9682-3D34CCF859E3.jpeg Pics attached, let me know if this is helpful, I will be at the boat for a few hours so if you need specifics or measurements, PM me and I’ll send you my number and get whatever measurements you need

    John
     
  5. Mcole1170

    Mcole1170 Member

    74
    Jul 24, 2017
    Long island
    2006 sundancer 280
    4.3 alpha
    Thanks a bunch. This helps tremendously i didnt even know they didnt mount in line. The instructions are the worst. It says the forward one goes on outside edge of the non skid yours i see are on inside edge

    Im here now and will check it based on your images. Thanks
     
  6. Mcole1170

    Mcole1170 Member

    74
    Jul 24, 2017
    Long island
    2006 sundancer 280
    4.3 alpha
    From bottom of arch it says 8in to center of the mount. Yours looks alittle less??
     
  7. Mcole1170

    Mcole1170 Member

    74
    Jul 24, 2017
    Long island
    2006 sundancer 280
    4.3 alpha
    One more question . says the mounts are to be oriented with push pin towards rear of boat. yours looks as if its facing the front
     
  8. Mcole1170

    Mcole1170 Member

    74
    Jul 24, 2017
    Long island
    2006 sundancer 280
    4.3 alpha
    Thanks again. Got it installed went fine except for the one broke screw from using wrong size drill bit.
     

Share This Page

Show Sidebar