2007 SD 260 freshwater system

[SeanPT]

i am trying to get my faucets and sprayers to work on my 2007 SD 260. I filled the tank with water. I then turned on both batteries. Then I turned on the water pump on the helm console. And.... nothing happens? Am I missing a step? Is there a valve I may have to turn? The owners manual states to look at the general information manual. That pub I cannot locate online.
Please help
Thanks
Sean
Florida

 

[Sublimetime]

Try and locate the pump, be sure it is running when helm switch is on. If it is not running you have to check and see if it is indeed getting power. If it is running , check for any valves that might not be open. Also look close at hose between pump and the storage tank, there should be a screen/ filter type apparatus that might be clogged , or loose and it is not letting it prime.

 

[SeanPT]

Try and locate the pump, be sure it is running when helm switch is on. If it is not running you have to check and see if it is indeed getting power. If it is running , check for any valves that might not be open. Also look close at hose between pump and the storage tank, there should be a screen/ filter type apparatus that might be clogged , or loose and it is not letting it prime.

Ok will do and I’ll you know if you i am successful. Many thanks

 

[bbwhitejr]

Are you sure there is a helm switch to turn on the pump? My ‘06 only had a 12v breaker in the breaker cabinet on the port side of the cabin entrance. Is the 12v breaker turned on/

Bennett