2005 240 Sundeck Bilge

T with a J

New Member
Oct 28, 2020
1
Boat Info
2005 Sea Ray 240 Sundeck 6.2L
Engines
6.2L Mercruiser / Bravo III I/O
Hey all, pretty sure my bilge pump is starting to fail on me. Anyone know a good step by step video or have prior experience switching it out have some helpful hints or steps? Any help would be appreciated.
 
Hey all, pretty sure my bilge pump is starting to fail on me. Anyone know a good step by step video or have prior experience switching it out have some helpful hints or steps? Any help would be appreciated.
Isn’t it right out front of the motor ?....Should be easy access.. stick with same model or a new version of the Existing model
 
TJ, you said "pretty sure"... is it ACTUALLY not pumping water? What exactly is it doing/not doing? Sometimes they just get clogged with junk from a dirty bilge.
 
Last edited:
Hey all, pretty sure my bilge pump is starting to fail on me. Anyone know a good step by step video or have prior experience switching it out have some helpful hints or steps? Any help would be appreciated.
I had an problem with my 2006 Sundeck bilge pump recently.
There is a pump and a float switch to check. They are reachable by removing the motor panel and reaching under the motor. Lift the float switch and see if the pump engages. The pump is removable to see if it is clogged. My problem after all these preliminary steps was the bilge pump switch on the dash.
Found this out by filling the bilge with water from a hose and waiting to see if the pump engaged, which it did proving the switch was the issue.
Good luck!!
 

Forum statistics

Threads
113,120
Messages
1,426,609
Members
61,037
Latest member
wojozobl
Back
Top