/ Register

2003 420DA Dash and Old Raymarine Electronics

Discussion in 'General Parts Classifieds - No Boats' started by HeyGirl03, Mar 23, 2018.

Page 1 of 2
  1. Mar 23, 2018 #1
    HeyGirl03

    HeyGirl03 New Member

    11
    Jun 19, 2017
    New Smyrna Beach
    420DA Sundancer 420
    Cummins 6CTA
    Hello,
    I just completed the upgrade on my new dash and electronics, and wanted to sell the old existing dash and equipment. Here are a list of items that I have for sale. All equipment is in good working condition, however ST7001+, ST60 and RN300 have sunburn marks on there respective screens. I have pictures of everything verifying conditions. If you have any questions feel free to PM me.

    Thanks!

    RL 80 C

    Smart Pilot X30 - ST7001+ - S100 - Not included is drive unit or Rudder Positioning Unit

    Ray240 Radio - VHF Handheld - Speaker

    ST60 - RN300 GPS instrument panel.

    (3) Original wood-grain dash panels
     
  2. Mar 23, 2018 #2
    superwa

    superwa Active Member GOLD Sponsor

    281
    Jul 27, 2013
    Rhode Island
    2001 Sea Ray Sundancer 380
    Mercruiser horizon 8.1S
    Hey there. What’s your price for the RL80C and can you post some photos? Could be a good spare. Also, any chance that you can power it on or know what version firmware you have? Needs to be newer than 2.06 and can’t really find anyone that will update them anymore. One more question, how was it to remove it? Is it screws from behind? I ask because I have no idea how I’d get back there on my 01 380 DA. Thanks
     
  3. Mar 23, 2018 #3
    HeyGirl03

    HeyGirl03 New Member

    11
    Jun 19, 2017
    New Smyrna Beach
    420DA Sundancer 420
    Cummins 6CTA
    Thanks for the reply! It was installed using two independent brackets. I provided pictures of it powered up, and what the bracket looks like from behind the dash panel. I do not have the power cable to check the firmware version unfortunately. I would be willing to sell for $350 Shipped? Powered_RL80C.jpg RL80C.jpg RL80C_Mount.jpg Powered_RL80C.jpg RL80C.jpg RL80C_Mount.jpg
     
  4. Mar 23, 2018 #4
    Jaybeaux

    Jaybeaux Well-Known Member SILVER Sponsor

    915
    Jan 3, 2016
    Upper Potomac River
    420 Sundancer 2004
    Naught On Call
    Cummins 6CTA-8.3's with V-Drives
    9KW Onan Genset
    HeyGirl03....I'd be interested in hearing about the new stuff you put in. Did you keep the original tachs and multi-gauges? Which chart plotter did you go with? Did you put in a completely new Auto-pilot system? Did you bring in engine data to new NMEA-2000 Network? Show us some pictures of your work! Did you do it yourself or have someone do it for you?

    Can't wait to see the finished product.

    Jaybeaux
     
    Blueone likes this.
  5. Mar 23, 2018 #5
    kysearay

    kysearay Active Member

    209
    Jun 15, 2017
    KY
    42 Sundancer

    65 Monticello
    8.1's gassers
    Great Thread, did you look into any of the Simrad gear and its continuity?
     
  6. Mar 23, 2018 #6
    superwa

    superwa Active Member GOLD Sponsor

    281
    Jul 27, 2013
    Rhode Island
    2001 Sea Ray Sundancer 380
    Mercruiser horizon 8.1S
    Thanks for the reply. I’m going to pass on it, but much appreciated!

     
  7. Mar 24, 2018 #7
    midexp

    midexp Active Member

    272
    Oct 5, 2016
    Harrison Township, Michigan Lake St.Clair
    1999 40' Sundancer
    454 merc
    Dumb question. Do you know if this unit would be compatible with a 1999 Raytheon open array scanner?
     
  8. Mar 28, 2018 #8
    HeyGirl03

    HeyGirl03 New Member

    11
    Jun 19, 2017
    New Smyrna Beach
    420DA Sundancer 420
    Cummins 6CTA
    I did but I was able to save a few extra dollars by utilizing the existing Raymarine drive unit and tiller sensor with the new raymarine autopilot. The new raymarine instruments and MFD’s are plug and play as well. Install was very simple.
     
  9. Mar 28, 2018 #9
    HeyGirl03

    HeyGirl03 New Member

    11
    Jun 19, 2017
    New Smyrna Beach
    420DA Sundancer 420
    Cummins 6CTA
    Sorry I am not sure. I would check with raymarine support forum.
     
  10. Mar 28, 2018 #10
    HeyGirl03

    HeyGirl03 New Member

    11
    Jun 19, 2017
    New Smyrna Beach
    420DA Sundancer 420
    Cummins 6CTA
    No problem.
     
  11. Mar 28, 2018 #11
    HeyGirl03

    HeyGirl03 New Member

    11
    Jun 19, 2017
    New Smyrna Beach
    420DA Sundancer 420
    Cummins 6CTA
    Thanks, I did the install myself, and it was pretty simple giving Raymarines SeaTalk and Ethernet Hub intergration. I used the existing gauges and had tecnografic reconfigure the dash panels to incorporate a Axoim 9” and 12”MFD. i have the mechanical 6CTAs so I had to use 2 analog to NEMA converters to get any data to the MFDs. I was able to pull those analog signals from the Gauges which made it pretty simple. I want to find a way to get fuel burn, but that is on the back burner till I can find a way to get it from the fuel system. I upgraded the autopilot system but used the existing drive and tiller sensor which helped save a few dollars. I also went with the quantum dome radar rather then the open radar that was originally on the boat giving cost difference. I will try and snap a few pictures of the finished product this weekend.
     
    Jaybeaux likes this.
  12. Sep 16, 2018 #12
    Gary B

    Gary B Active Member

    266
    May 20, 2015
    Long Island
    2007 52 Sedan Bridge
    Cummins QSM 11
    Do you still have the RayMarine 240 speaker for sale
     
  13. Sep 16, 2018 #13
    NotHerDecision

    NotHerDecision Well-Known Member PLATINUM Sponsor

    1,897
    Jun 28, 2016
    Houston, Texas
    2001 Sea Ray 460 Sundancer
    2014 Seadoo 155 LTD
    2105 Seadoo 130 SE
    2013 Mercury Dinghy
    Cummins 6CTA 8.3L
    What would you take for st7001+ control head? I just need it for internal parts so don’t care about the screen really.
     
  14. Sep 18, 2018 #14
    HeyGirl03

    HeyGirl03 New Member

    11
    Jun 19, 2017
    New Smyrna Beach
    420DA Sundancer 420
    Cummins 6CTA
    yes sir. It is still all available.
     
  15. Sep 18, 2018 #15
    HeyGirl03

    HeyGirl03 New Member

    11
    Jun 19, 2017
    New Smyrna Beach
    420DA Sundancer 420
    Cummins 6CTA
    $150.00 plus shipping.
     
  16. Sep 19, 2018 #16
    Gary B

    Gary B Active Member

    266
    May 20, 2015
    Long Island
    2007 52 Sedan Bridge
    Cummins QSM 11
    How much do you want?
     
  17. Sep 21, 2018 #17
    HeyGirl03

    HeyGirl03 New Member

    11
    Jun 19, 2017
    New Smyrna Beach
    420DA Sundancer 420
    Cummins 6CTA
    Ill sell whole raymarine 240VHF for $100 plus shipping
     
  18. Sep 21, 2018 #18
    Gary B

    Gary B Active Member

    266
    May 20, 2015
    Long Island
    2007 52 Sedan Bridge
    Cummins QSM 11
    Sold
    Can you PM me? Or call my cell (516) 380-4733
    Gary
     
  19. Sep 29, 2018 #19
    Gary B

    Gary B Active Member

    266
    May 20, 2015
    Long Island
    2007 52 Sedan Bridge
    Cummins QSM 11
    HeyGirl
    Definitely interested in the vhf speaker. Please text or call me (516)380-4733 to arrange payment
     
  20. Nov 27, 2018 #20
    rkcdude

    rkcdude New Member

    7
    Apr 25, 2016
    Georgia
    240
    5.7
    Hello do you still have the ST60? If so, how much?
     
Page 1 of 2

Share This Page

Show Sidebar
Welcome to our site! Please take a moment and Register today!