2002 340 interior Rope lights

Discussion in 'Sport Cruisers' started by speakrdude, Mar 7, 2018.

  1. speakrdude

    speakrdude Active Member

    Feb 21, 2009
    Northwest Arkansas
    2002 Sea Ray 340 DA
    Raymarine C80 Tri Data
    twin 6.2 MX MPI
    Anyone replace these yet?
    The front and the rear lights have a few bulbs burned out. Want to replace. LED maybe?
    Any luck?
    Thanks
     
  2. NotHerDecision

    NotHerDecision Well-Known Member

    Jun 28, 2016
    Houston, Texas
    2001 Sea Ray 460 Sundancer
    2014 Seadoo 155 LTD
    2105 Seadoo 130 SE
    2013 Mercury Dinghy
    Cummins 6CTA 8.3L
    Made by imtra. I replaced all of mine with their new led version. It’s slightly smaller so you have to order new clips as well but the power supply is the same. I simply used butt connectors with heat shrink and it works perfect. Only thing is you will have to do all or nothing because the new stuff is a much cooler white then the old.
     
  3. Captain Allen

    Captain Allen Member

    336
    Feb 2, 2009
    Coastal North Carolina
    370 EC 1994
    454 Mercruisers, straight drives
    I bought some for our home to replace those over the kitchen cabinets from Home Depot that are the warm white incandescent type. Only place I could find them. I tried the LED's but even the warm white version of them was too cool to match the other lights in the room.
     
  4. Creekwood

    Creekwood Well-Known Member GOLD Sponsor

    Apr 26, 2009
    Oakville and Georgian Bay, Ontario
    '97 330 Sundancer, Raymarine C80 suite with radar, Mercury 310 Hypalon w/8hp Yammie 2stk
    2X 454 carbs w/ vDrives
    I bought a roll of 12v warm white strip light and replaced mine with that. Works fine and just used the peel and stick backing to install.
     
  5. Blueone

    Blueone Well-Known Member SILVER Sponsor

    Jan 24, 2007
    Lake Erie, Ohio
    2004 420 Sundancer
    Cummins 6CTA 450's
    I just replaced my blue rope lighting under the master bed with this 12v LED peel and stick. I think it's a bit bright will have to see when everything is put back together. I just wired it directly to the cut off leads from the rope light

    led (2).png
     

Share This Page

Show Sidebar