2001 Sea Ray sundancer electronis question

[Steve500dancer]

Thank you guys very much. I have left my plotter on for 30 or so minutes and still nothing. I pulled the Antenna apart and the soldered connection was still in tact. I did by the boat in Florida and it moved to Tennessee. I would hate like hell to by another antenna and that not be the problem. My garmin 2006c works great. I wish that I could pull of that antenna as well. My broker did replace the cover on the head blower for me before I had it shipped. He still has a couple of things that he has left to take care of. I am still having a small problem with the starboard engine only getting up to 4200 RPM's and the port engine getting up to 4600 rpm at full throttle. I have checked everything all that is left is a prop issue. I am going to have the props pulled by a diver next week and have them checked. They looked fine when we put it in the water. The starboard engine is in sync till 3900 RPM then the port engine will go to 4600 rpm and the starboard stays at 4200 tops. The boat only has 308 hours on it. We hooked it up to a mercruiser computer and it showed no codes and running perfect. The broker even changed out both tachometers twice. I hope it is the props. The other problem is that the cabin fridge doesn't get cold enough. They had both refrigerators serviced as part of the contract as well. I am just a perfectionist and want everything just right.

Oh I did add a 26" flat screen TV on the radar arch that works fantastic. I also wired up a DVD player to it, and it works off the generator or a small inverter that I rigged up to it. I will try to attach a picture. It is fantastic to be able to lay in the lake and watch the game or a movie. I wired the sound through the stereo too.

Thanks
Steve

 

[bone354]

Steve can you send me some pic of tv install Thanks Rich Email bone354@aol.com