2001 Amberjack 340 question about systems monitor

Harley Stack

New Member
Aug 28, 2019
5
CT
Boat Info
2001 Amberjack 340
Engines
Inboard. Two, MerCruiser MIE 7.4L. 380 HP with ZF Hurth Marine HSW 630 A1 V drive transmissions
Folks
I have a "Systems Monitor Panel" on my dash that is dead - it supposedly connects to a unit in the engine compartment/bilge via coax. The Coax from it is not connected and the sea ray manual does not show its location or what it looks like other than in the bilge.
Can someone help describe what it should be connected to? Other threads talk about going to "Sea Ray for that answer." I am trying to get them to call me. There is also the harness and the 'black box' down in the bilge. You can buy a replacement monitor from Flounder Pounder - where is this black box - what does it look like?
Thanks, everyone for any info.
 
On my 01 380 DA the coax goes to that black box (module) and it’s really close to the systems monitor screen, right below the helm near all the fuses. Not really in the bilge
 
Thanks superwa - can you say what it looks like? How large?
 
It’s maybe 7-8 inches by 4-5 black box. Should say systems monitor module in it. For me it’s below the helm, inside the compartment with all the fuses, way in the back
 

Forum statistics

Threads
112,944
Messages
1,422,729
Members
60,927
Latest member
Jaguar65
Back
Top