2000 SearRay 270 Sundancer - HELP!

[AdrianS]

Hi brains trust! Need your HELP!
I have a 2000 SeaRay 270 Sundancer. Dual motors.
I need to replace the gauges or ideally the whole panel. Does anyone know where I can buy one that fits my particular boat? See attached photo.
Have searched high and low without success.

 

[Creekwood]

Hi brains trust! Need your HELP!
I have a 2000 SeaRay 270 Sundancer. Dual motors.
I need to replace the gauges or ideally the whole panel. Does anyone know where I can buy one that fits my particular boat? See attached photo.
Have searched high and low without success.

FP marine sells the panels:
https://fpmarine.com/270-sundancer-...tion-instrument-and-switch-panel-set-sea-ray/

 

[AdrianS]

Thanks Creekwood, but i need the gauges themselves as well. That's where I'm struggling finding the same or very similar. Who would have thought it would be so hard!

 

[Golfman25]

Thanks Creekwood, but i need the gauges themselves as well. That's where I'm struggling finding the same or very similar. Who would have thought it would be so hard!

You’re probably going to have to find some aftermarket set that will work.

 

[Lazy Daze]

The gauges were custom made for Sea Ray - you won't find those readily available for retail. Other than if a dealer has them sitting on a shelf and you may have contact many dealers to get the set.

The fogging will go away as the sun beats on them.

Otherwise, there's really no reason you have to have the "Sea Ray" gauges. Look at Faria, for example.

New Wire Marine is another source for the panel (and other stuff).

 

[Wanderer 290]

I found the exact same gauges just missing the sr emblem on line. I’ll Ck my file and let you know the vendor when I get home later this week

 

[Wanderer 290]

The replacement gauges I bought matched perfectly (except for the small sr on the face) and were purchased at Flounder Pounder.