2000 Searay 380DA, Radar Panel Removal?

Discussion in 'Sport Yachts/Yachts' started by Gallf1, Nov 13, 2019.

  1. Gallf1

    Gallf1 Member

    91
    Sep 26, 2018
    Palm Coast, FL
    2000 Searay 380
    Mercruiser 454 MAG MPI 7.4L
    I am installing a new Fusion Stereo in the boat. I will be placing the new remote in the location of the factory non-working round remote that is just above and to left of the Radar/Radio dash panel.

    Any clue on how to remove that panel so that I can get to the back of the remote and remove it? I have my Simrad GO12xse in the panel and I dont want to accidentally damage it! There are no screw heads and I cant see how its fixed to the dash.

    Thx for any advice
     
  2. Lazy Daze

    Lazy Daze Well-Known Member TECHNICAL Contributor GOLD Sponsor

    Apr 21, 2009
    PA
    Various
    Various
    If there are no visible screw heads, the most common thing Sea Ray does is to glue bolts to the back side of the panel. Pull another panel off so you can see/feel the backside - look for small nuts holding the panel on. Use your phone, if needed. There's a small possibility that it's held in place with Christmas trees - you'll know once you look. Unless your boat has an access panel on the cabin side... but that is rare.
     
  3. superwa

    superwa Active Member GOLD Sponsor

    288
    Jul 27, 2013
    Rhode Island
    2001 Sea Ray Sundancer 380
    Mercruiser horizon 8.1S
    In my 01, you have to reach from behind by removing the gauges panel and reaching for the screws. It’s not fun. Not sure you could also try by removing the hatch to the cabin
     

Share This Page

Show Sidebar