highball
New Member
I have a 2000 410 DA with 7.4 Horizons ( yes gas !!) and the tack on port side is driving me crazy !!!!
When I bought the boat a few years ago the tack was working on and off when it felt like it. One day good the next would stay at 1500 RPM. the hour meter works fine but tack itself ?????
I found a new one and put in last summer. It seemed to work fine last year but this year same thing as the previous one.
I did the knob in back thing ( turn one side and the other put back on 8 position no go.
If I take the wires from the starboard side ( yes port is fully disconnected) it works with other wiring.
I suspect the signal wiring from motor might be broken or ????
Where would the wire be connected and what colour ???
Usually a tack is connected to coil but the wiring on guage and tack don't match
Any help would be greatly appreciated
When I bought the boat a few years ago the tack was working on and off when it felt like it. One day good the next would stay at 1500 RPM. the hour meter works fine but tack itself ?????
I found a new one and put in last summer. It seemed to work fine last year but this year same thing as the previous one.
I did the knob in back thing ( turn one side and the other put back on 8 position no go.
If I take the wires from the starboard side ( yes port is fully disconnected) it works with other wiring.
I suspect the signal wiring from motor might be broken or ????
Where would the wire be connected and what colour ???
Usually a tack is connected to coil but the wiring on guage and tack don't match
Any help would be greatly appreciated