1992 330 Sundancer

[Capt Phil]

I cannot set up the bed in the kitchen area. I appear to be missing something called "sofa filler assembly". Can anyone tell me or show what this looks like? I think it is part number 518407

 

[Almightys]

I have the same issue. Have the filler cushions but nothing to support it underneath. Would love to see a pic from someone as to what this magical thing looks like

 

[Gofirstclass]

This is what I did for my 1996 330. I attached a board along the front of each seat, set about 1/2" down below the top of the seat front. I cut two pieces of 1/2" plywood to fit the opening between the bench seats. When we were using it as a dinette I stored the plywood pieces beneath the seat cushions. To make it unto a bed, simply fit the plywood pieces into the area between the benches and use the seat back cushions for the center area of the bed.

Easy Peasey.

 

[munko]

My '94 330 the salon berth uses the extra large table that is stored under the front berth.
This supports the cushions.
The cushions are not symmetrical, the shape of the berth is almost triangular.
I have image from parts manual, but I am having difficulties uploading it.
Try Searay.com and get parts manual for '92-'94 330 DA.

 

[Douglas Thurman]

I am new to this forum, so I need to ask if anyone has schematics or wiring diagrams for my 1992 sea ray sundancer 330. I need the ones for the boat itself, including the battery and charging systems.

 

[tdschafer]

I am new to this forum, so I need to ask if anyone has schematics or wiring diagrams for my 1992 sea ray sundancer 330. I need the ones for the boat itself, including the battery and charging systems.

Douglas,
This is a thread about converting a dinette to a bed from about 18 months ago. Most folks will scan "New threads" when they log on. Why don't you try starting a new thread in the "electrical" forum? Title it "Looking for schematics '92 330 DA". I'm willing to bet that you will get a much better response! Good Luck & welcome to the forum.