1980 260DA shift/throttle cables

Discussion in 'Classic Sea Rays' started by LiquidWrench, Dec 25, 2016.

  1. LiquidWrench

    LiquidWrench Member

    78
    Sep 6, 2014
    Marco Island, FL
    1972 SRV 240 weekender, 1980 260 Sundancer
    Mercruiser 888 (240), Twin 470's (260)
    I need to replace the shift and throttle cables from the helm to the engines on my 260. Would anyone have an idea of the lengths of the cables or where I would find the lengths without tearing everything apart?
     
  2. The Magic Bus

    The Magic Bus New Member

    14
    Sep 3, 2014
    Lake Murray, SC
    1988 Sea Ray 268
    7.4L 454 330HP
    The cables were mgf by Quicksilver.
    Check with your Mercury Marine dealer for part #'s.

    Hope this helps.
     
  3. BlewByYou88

    BlewByYou88 Member SILVER Sponsor

    936
    Jul 24, 2010
    Arizona
    268 Sea Ray Sundancer 1988
    2X 4.3L 4bbl Mercs w/ Alphas
    Actually, most of the cables were manufactured by Morse Controls. You will find part numbers down towards the engine side, about 12-24" back from the cable ends. Depending on the actual manufacturer, they will read in either inches or feet.

    This may help. http://westernmarine.com/acrobat/tfmcontrolcables.pdf
     
    Last edited: Jan 5, 2017

Share This Page

Show Sidebar