Two weekends ago while making a trip across Mobile Bay, I heard what sounded like screws being pulled out of a plastic hole only to stop and find the hull to deck joint being pulled apart for most of the width of the swim platform. I did have a small dinghy and motor on davits on the platform so...
Hi I just purchased a boat and I am trying to get a trailer for it. It is a 1999 Sea Ray 215 Express Cruiser It is on a dry rack now and I can't get the measurement and I need that for the trailer to fit the boat correctly. Can someone please help me with that measurement. Thank you so much!
Sharon
Ahoy!
New here but not new to boating nor fixing old boats. As the title suggests, I have a 1988 Seville 21CC and I discovered some rot. Well, I knew about most of it but I've become more concerned about it. It has some weird patterns to it - like it's in some places but not in others where I'd...
I was replacing the Zinc's on my 2005 420 sundancer and one of the bolts on the transom zinc snapped flush with the transom. I thought OMG now I have to drill it out and get an ez-out. Got the equipment and started drilling and about 1/4" deep in disappears. Yep gone. Turns out it is a bolt that...
I’m restoring a 18’ 1970 Sea Rey Pachanga with a 327 Chevy / and I assume a 1st gen Merc cruiser outdrive. I understand that the thing to do is get rid of the outdrive and replace it with a newer Merc cruiser outdrive?? My questions are. What outdrive to use and will I need to glass up the...
Price $2,400
New in box MerCruise SmartCraft Transom
Part Number: 6315002TP
Was purchased for an 8.2 L MerCruiser Bravo 3
Located in Oxford, Maryland
Buyer responsible for pick up or shipping costs
My first post on the forum after purchasing my SR 185 Sport with wake tower last summer (85 hours!).<br>
<br>
The interior of the boat is immaculate and the engine clearly has low hours on it and I know the previous owner, however, I am at a loss as to whether or not I should repair these...
:smt100
I have looked everywhere but cannot find this measurement to set up the winch post on my Trailer. Sea Ray doesn't show it in my manual.
- Can someone please tell me what the BOW EYE to TRANSOM measurement is on the old 240SD (2002 - 2007)?
- If someone also can tell me the bunk spacing...
We have a beautiful 1972 SRV 180 with a 165hp I/O. Even with a full tank of gas in the bow, and two people standing as far forward as possible, the bow rises like a @$@#$ out of the hole, and then porpoises on flat seas. The prop is trimmed in 100%. Does anyone have any advice or experience with...
Hey everyone, the wife and i are in the process of purchasing a 1995 Sea Ray 330 DA, finally talked her into a bigger boat. It is missing the transom locker door and i am having a hard time finding a replacement. Sea Ray used the same part number from 1995 thru 1998 on all their 330DA's. Any...
Hey everyone, the wife and i are in the process of purchasing a 1995 Sea Ray 330 DA, finally talked her into a bigger boat. It is missing the transom locker door and i am having a hard time finding a replacement. Sea Ray used the same part number from 1995 thru 1998 on all their 330DA's. Any...
Not sure how, perhaps one of the kids pulled too hard on the spray head, but my transom sprayers started leaking water from the hose. I decided to replace the hose and ducked down under the engine cover with my trusty wrench. First mistake.
I discovered that the metal cover on the line is...
I've noticed the rust stains coming from the engines on the transom (see pic). Is this a sign of a problem (i.e. galvanic corrosion), or does it just show that I worry too much and I need to clean the transom more often.
I have Twin 5.0 with Bravo III's on a 2004 280 Sundancer. The boat is...
I remember someone posting information about a remote trim switch. Maybe it was at the SRO site.
Anyone with some information? It seemed like an inexpensive add on and I'm getting tired of climbing on the boat to lower the trim.
Thanks