transducer

  1. D

    Which transducer on a 1998 260DA

    Hi, I just bought a 260DA from 1998, with a factory standard depth transducer but no head unit. Can anyone let me know any example makes / models of digital depth sounder which are compatible with the transducer (or even what type of transducer they installed back then). Many thanks DC
  2. L

    dead rise and thru hull transduced

    Hello, 1986 25 ft fisherman cuddy I am going to install a Garmin (airman p79), shoot thru the hull transducer, mid ship, (unless someone suggest a better spot). If anyone knows the 'dead rise" at forward bilge area, please let me know. Also, if anyone has installed this transducer and...
  3. S

    Installing a Garmin 441s

    I just picked up a 2010 185 Sport, with 4 hours on it. Just placed the order for the GPS, I purchased the Garmin 441s. Now I have a couple of questions. Does anyone have any suggestions as to where they have mounted theirs? also what about the transducer? There is already one in the hull for...
  4. Jocomo

    Looking for transducer location in 89 Sundancer 300

    I'm sure I could eventually find it, but thought I would ask if anyone knows where the factory installed transducer is located on a 1989 Sundancer 300? Based on the spec guides I downloaded from SeaRay's website, it uses an "Inside Mount Transducer", but gives no indication as to its...
  5. J

    Best transducer location in 190 bow rider?

    I'm a newbie owner of a 1997 190 bow rider, and it came with a low-end Humminbird fish finder with transom-mount transducer. More often than not it flashes 3.8 feet regardless of the true depth, so I'm thinking of cleaning up the whole installation by putting a depth gauge in the factory dash...
  6. templerj

    Transducer for 1978 30' Weekender..help!!

    Just bought a 1978 30' Weekender, and looking at depth finders.... wondered if a 'shoot through the hull' transducer will work or not on this boat (they said it won't work on a 'double hull' boat - whatever that is?)...... It is a Hummingbird model if that helps. Any feedback on this is...
  7. P

    shoot thru the hull transducer

    Has anyone had any success at installing a shoot thru the hull transducer for a depth / fish finder. I dont want to drill thru the hull and to run the wire on the outside would be an eye sore. I have a 97 175 ob with a 3.0 merc
Back
Top