sundancer

  1. S

    2004-2006 Sundancer Exhuast Defects (300,320,340)?????

    I have some serious problems with my 2005 320 sundancer Mercury engines over the last couple years. Most recently had the exhaust manifold blow out flooding the engine with salt water destroying the engine. We are Meticulous in maintaining our engines, flushing the engine with salt away for 15...
  2. P

    Sea Ray 290 Dancer - 220 HP vs. 260 HP

    We are currently in the market for a 2007 SR 290 DA. It is between two boats. One with the upgraded twin 5.0L bravo 3 (260 HP) and one with the standard 4.3 bravo 3 (220 HP). Everything else is almost equal - hours, options and price. Any advise, comments or suggestions?
  3. C

    Caulk Recommendation

    I removed all the hardware and all the caulk from every seam on my 310 Sundancer before I refurbished it. I now need to recaulk everything, inside the cockpit and out including the rub rail top and bottom. I will be remounting stainless hardware as well. What white caulk and sealant do you all...
  4. S

    Need a new filler cushion for cockpit on a 2008 44 Sundancer

    Hello, I'm very excited to have just purchased a 2008 44 Sundancer and it's missing the cushion in the cockpit that is removable to allow entry onto the boat from the starboard side. Sea Ray no longer makes them so if any of you know of a good company who could make or replace one please let me...
  5. Pyrojodge

    1989 340 DA Refit... Take a look

    Hey guys, I wanted to start a dedicated post to my progress on my Sea Ray. I have owned the boat going on 7 years and have loved every-second of it. I got the boat at a reasonable price and it is very strong and mechanically sound. Please feel free to give out ideas for me. Thanks for...
  6. ranfot

    tri fold hatch door 270 Sundancer 1986

    Hi all, I have recently acquired 1986 270 Sundancer. Its a big project, since a LOT of stuff need to be replaced. I need to replace a missing tri-fold hatch door (just like the one on the attached picture) If anyone has same boat, can you provide me with set of close up pictures or link where I...
  7. Gunn

    280DA Rod Holder Installation Success!

    I finally did. I finally drilled two 2-1/4" holes in my gunwales. All the anxiety is finally over. And it was a complete success. I can see why there isn't one thread or post on this forum of anyone who has done it, it's not for the faint of heart. And Sea Ray made it difficult on the port side...
  8. pagan

    2004 240 Sundancer Power trim

    Hi, Maybe someone can help me. I went out with no problems one day, then 3 days later I went to go back out and my am/fm radio is out, my cb radio, my 12v outlets, and my power trim to raise and lower the outdrive is stuck in the up position. I checked all the fuses behind the steering wheel and...
  9. K

    Looking canvas for 93 300 Sundancer with Radar Arch

    Hi, has anyone got a canvas in good condition that would fit my boat they would like to sell. I am based in the UK so would cover postage etc. I'm currently being quoted a 6 to 8 week lead time here and would like one a lot sooner (British weather...!!) Many thanks, Kev
  10. C

    Power Outlet Locations on a 1997 37' Sundancer

    Electrical outlets are all dead. We cannot locate the outlet with the GFI switch or Reset button. Does anyone know where this main outlet may be onboard? Thanks, ChicagoBoater
  11. H

    270 Anchor Light Pole

    Hi all, Our 2000 270 Sundancer came equipped with an 84" anchor light pole because there is no radar arch. It is a pain to store on the boat. Is there any other option besides the 84" pole such as a telescoping pole or folding pole? Thanks Mark
  12. M

    Borg Warner Transmission and V-drive removeal - 89 340 Sundancer

    I am trying to remove the transmission and v-drive from my 89 340 SD with twin 454's space is limited, anyway, I have the engine blocker up and all bolts removed and I assume the unit needs to come out as one instead of Tranny and V-drive separate? So with only about 1.5 inches from v-drive to...
  13. S

    Upgrading from a 260 Sundancer to 320

    I'm looking to make the jump and upgrade from my 2007 260 Sundancer to a 2004-2006 320 (Let me know if you have any friends interested in a 260). Anyone have any advice about the 320s? Options that are great to have and I should look out for? Positive comments? Negative? I want inboards on the...
  14. R

    WTB Bow Sun Pad for a 1989 440 Sundancer

    Looking for a Bow Sun Pad for a 1989 440 Sundancer. I believe that these were all the same from 1989 to 1992. Any help would be appreciated. 573-480-6995
  15. S

    Wanted: Swim platform for 2005 280 Sundancer

    Need to either re-build or replaced my swim platform. Re-build estimate is $2000. I would much prefer to find a used one in good shape or have a new one made. I'm hoping someone knows of a wholesaler or salvage place that might have a 2005 or 2006 swim platform. And I think that older & new...
  16. P

    New Sundancer 330 owner

    hi everyone, We just bought a 1997 Sundancer 330 and wanted to say hello to this group. I have been on this site in the past although I never registered or posted. My name is Steve and I am up in NY.... although my boat is still in Maryland. Yes I am counting the hours until I can drive it...
  17. MasterFab

    2002 340 Restoration

    Hello everyone, I have started a blog to chronicle the restoration of my 340 Sundancer. I would be interested in knowing what you think, and in any ideas you may have. Please see: http://searay340restoration.blogspot.com/ I hope it becomes helpful to other Sea Ray owners.
  18. Steve S

    EC vs Dancer (diesels) - What are the differences?

    I am currently looking to upgrade to a bigger boat for use on Lake Michigan (Chicago area) and I am considering moving to something like a 40' EC. If I go that big I have settled on diesel power and in searching around I have noticed a few EC's and more Dancers available with the Cat diesels...
  19. D

    1987 engine hatch covers

    Hi everyone after my boat sank we lost the engine hatch covers and are now diligently in search of finding the hatch covers that make up the floor. If anyone has an idea where I may be able to locate some it would be greatly appreciated.
  20. D

    1987 340 da

    Hi everyone I own the boat that sank in the Niagara River near the Peace Bridge in NY. I am currently looking to find parts to begin restoring the boat. If anyone has parts available for the boat please let me know. I will try to get a complete list of parts; but, for now I am willing to look at...
Back
Top