steering pin seal

Does anyone know if you don’t use the JR marine repair method , then does the engine have to be removed? (350 MAG MPI/BravoIII 2007) Marine tech pointed out a leak between transom and engine and recommended this repair. Is the leak wetting the transom (first boat first year)...

Had the boat hauled out several week ago, when it was put back in the steering wheel just spun loose. Did not turn the rudders. There was also fluid leaking from under the wheel. Do I need to take the wheel off and investigate or does it sound like air is in the system and I need to bleed the...

Ok, so this is part 2 of my Bravo III drive problems! Over the summer I've found water in the bilge (I keep a very clean and dry bilge, so this is noticeable to me) that only occurs when underway. That is, no water enters when docked. On inspection from the ER, there is water (splashed) high...