Hi all,
Has anyone any suggestions for wiring a twin engine boat with three house batteries so five batteries in total. I like the look of the blue sea automatic charge relay complete with battery insolation. However, I cannot find a solution for using this ACR with two engine batteries along...
Hi all,
Newbie here. I'm Tony and I am about to embark on fixing up a 1987 Searay 300. The boat came without engines, outdrives etc. and some of the wiring loom missing. I was hoping someone could help me with wiring diagrams for the boat as I have searched the net and I been unsuccessful...
I purchased this wheel in the spring for my 520DA. After I installed it, noticed it was a bit smaller than the original wheel (Over-all Diameter). I have decided to sell it, and go back to the original wheel. This is in new condition - wheel is wrapped w/stitching, has brushed spokes and has...
Hi
Thanks for taking time to read and assist me.
I am just about to buy a 375 Sundancer 2005 model with Shaft Petrol.
Does anyone have any comment on this vessel, especially known issues to look out for?
I will be getting a professional surveyor though first hand info is often the best...
In repairing/replacing various components of my Zeus system (2012 470DA) over the past 7 years, I have learned there are several known problems relating to the system. Particularly, the Trim Tab Actuation System, Steering Seals and Prop Shaft Seals. I have invested well over $35k...
Hey guys i have a 1978 srv 260 with twin 470s.. both engines run top knotch. My issue is with the cooling system one engine temperature gauge creeps up and up and up until i pull it back off plane. I can run them both at 2500 or less there fine as soon as it starts pushing water to plane it...
2004 sea ray sundancer 260 with a 350 MAG engine and a Bravo 3 outdrive
Yesterday i went for a ride was out on the bay anchored all day no issues on the way back i was around 4200 rpms and 28kts and all of a sudden i heard the alarm go off. it was 1 beep every 1 min.
The boat still had power...
I just purchased this project boat in hope's to start the restoration process. For the most part everything is in tact but I am looking or searching for a parts list or somewhere to purchase the parts, any ideas from the experts would be helpful. I'm located in Virginia.
Sorry for the long story
Hi guys new to boats and posting.
Trying to grasp this internet thing.
Given a 95 sea ray which sat for 10 years.
So I first Emptied fuel tank.
Sloshed with small amount of fuel and emptied. I then filled tank with new premium fuel and added sea foam. Changed the plugs...
I am looking for anyone who might have a good picture or diagram on how the Throttle and shift cables are attached to the 7.4 magnum engine with a cutler after market fuel injection installed. I purchased this boat last year it had a lot of work done to it. The owners fell into financial...
Looking for the owner of Tapped Again to answer some questions about rigging and running gear. This is one of the nicest done SeaRay 370EC s we have seen.
Hi everyone,
I've been having issues where my boat (1987 Sea Ray Cuddy Cruiser, Inboard 230HP 5.0L V8 Mercrusier) will die when out on the water, turn over when I try to start it, but wont start. I believe it's the alternator because when I get towed back in, and charge the batteries, it...
I am a new member. Just salvaged a 2006 32ft Sea Ray Sundancer. I have a lot of parts in great condition and will be posting them for sale if anyone is interested.
Hi guys I just bought a 1986 21ft searay 210 Seville cuddy cabin with a e-z load trailer. The po told me that it does take on some water and that he has taken it to a couple of marina's and they cant find the problem. I took it out for the first time to see and come to find out it did take in a...
Hi All
Does anybody know how to remove the forward cabin sliding door from a 97 370 Sundancer
mine has come of the track and the guide fell off and down into the cavity so I need to remove the door to
get it back
Brad C
Hey guys. I was recently given this boat by my friend. It needs some work, but I am definitely willing to put it in. It's needs a new engine, but that topic is covered in this thread http://clubsearay.com/showthread.php/80455-1988-SeaRay-230-engine-replacement
Anyways, this is my first boat and...
Hey everyone, this is my first time posting but bare with me. I'll try and give a quick rundown of what happened. I was given this boat by a family friend as a gift and am extremely ecstatic about it. This is my first boat. I do realize that it takes a lot of work to maintain and own a boat but...
just acquired this boat for free and it needs a ton of love. the motor hasnt been started in almost 13 years and im afraid to try it.
i know the thermostat needs to be replaced since i can see its cracked and the impeller fan.
anyone have any suggestions on where to start to get this sucker...
Hello All,
I m stumped and hoping that some of you can shed some light on an issue that I am having. I took my boat out a couple of weeks ago and ran fine. I did notice that when I started it up at the dock, it seemed a bit sluggish. Sounded like the carb had something in it. In any case, I...