Hello SeaRay Enthusiasts on Club Sea Ray!
Henry from Mariteak here. Every SeaRay boat tells a story, and it's often through the unique customizations each owner brings to their vessel.
We'd love to see how you've personalized your boats. Share your photos and tales of all the enhancements and...
Have a 210 bow rider that won’t crank over. The 50 circuit breaker just clicks once on each attempt.
Put in new battery and tested both sides of breaker and was fine. Also tested voltage at starter which was fine.
Wondering if it’s a bad starter but thought I would ask y’all for advice.
2001 Sundancer with 2012 Horizon inboards.
Does anyone know of a good video that shows how to remove the complete cool fuel unit?
I attempted to just replace the pumps but a couple of the bolts sheared(great design). Can I disconnect the water line without sinking the boat(my seasick won’t...
I have a small issue. I entrusted my Westerbeke 7.0BCG (daihatsu ED10) cylinder head to a machine shop and they lost it. Thats a whole different discussion... sigh... however i was able to get a new head, however i need the camshaft. I could order it from westerbeke however I cannot figure out...
Hi All,
My 2002 260 Sundancer developed a loud humming under the stairs to the cabin. Upon further investigation it appears to be the bilge pump. If I hit the red button it stops... It seems to do this quite frequently. Is this normal, or am I correct to hit the red button and will I need some...
Hi All,
On my 2002 260 Sundancer I want to get my wet bar sink in running order. I purchased the boat missing the sprayer, and the sink appears to have a small hole / bubble in it. I have been hunting for the OEM parts from the parts manual but have been struggling to find the exact part #...
Hi all,
Brand new here. My wife and I are ready to get our first boat and we're big fans of the SeaRay Sundeck series. It's the perfect boat for a day on Puget Sound or a lake. Right now we have an offer on a consignment boat with our local SeaRay dealer and I thought I'd ask if we should...
Hi.
I have a Sea Ray 200 Sport of yearmodel 2005. Mercruser 5.7l V8, Alfa Gen II
I am in need of reparing some gelcot cracks and damages.
Im looking for the gelcot color number to find the best match. Both for the white and black gelcot outside the boat.
I have read that jotun and spectrum...
400 Sundancer water tank crack and repair
Last weekend I found water running into the bilge from the forward cabin area. Upon Inspection i learned that the 100 gallon L shaped tank under the aft bed was cracked in the inside corner of the L and the whole tank was surrounded by 6 inches of...
Hi all,
I am a newbie on this site, but am DESPERATE to find a solution to my broken front hatch... It was docked when a storm came up, and the only damage to the boat was that the front hatch (covering the front ladder and anchor well) was cracked right in half (crazy, right!? It happened...
Does anyone have any tips to repair a broken grab rail that leads to the foredeck? It is part number 1846671 on the 2007 310 Sundancer. Looks like I might have to take the door off, but can't figure out how to do that either. It seems like a really poor design.
Any input would be...
Is there anyone out there who would like to come to Huntsville, Alabama to completely redo a 1998 370 Sundancer bimini, and covers? I have tried for nearly 6 months to get the attention of the local guys, but they apparently have so much work that 3 grand means nothing to them.
If you are...
Ok so my marina broke the skeg off my Alpha 1 lower while putting my neighbors boat away in their rack. :smt021
They said they are getting someone in to repair it this week.
Questions...
How do you think they will repair it? Is aluminum welding good enough to hold up?
What other...
Hi All,
Just got my first Sea Ray (2002 270 Sundeck)
Been talking to a lot of people regarding the the pros and cons of IO's.
Concerned about major repairs and I'm willing to take as much precautions as i can to minimize them.
If you could tell me one tip to keep the Motor in good...