props

  1. D

    Parts from a 2008 350DA, many fit 340DA and post 2009 370DA

    Hello, I sold my 2008 350DA and I have the following parts: - 2 spare props (OEM fully reconditioned in box) - shaft drive w 8.1's - 18"x 20"x 5.25"- 175" x 72.37 & 18"x 20.5x 5.25"- 72.37 - 2 spare rudders - 1 brand new Ocean LED light - Full set of SR custom fitted sheets (vbirth galley and...
  2. R

    Props/Shafts/Struts/Seals

    Hello, one more question from a new boater please. The 1997 330 Sundancer that I purchased came with 100% brand new Mr Minus Dymex 1.5" 17x17 bronze props (2), two 1.5"x 63-3/4 SS Shafts and also the struts, seals and couplers. I thought I would put the shiny new props on and sell the other...
  3. B

    Reproping 1989 Sea Ray 340 - shaft drives

    I own a 1989 Sea Ray 340 now kept at a resivoir in Pueblo Colorado. I probably know less about this boat than any other I have owned. The boat runs well but will not plane. It was first kept and I assume outfitted for a low altitude lake in Texas so I am assuming the props need to be changed...
  4. B

    Mercury Revolution4 Props wanted

    Looking for pair of 15P or 17P, thanks!
  5. C

    350 express cruiser props 1990

    Hey all I have a 1990 express cruiser with twin 454s, it will run about 23 mph on the gps at wot 4300 rpm. so I'm looking at new props as what I have are the factory 3 blade bronze props. I just got some info on some 17x16 Nibral Propellers (acme Brand I think) with .105 cup and .70DAR this is...
  6. V

    Different Size Props

    Just Surveyed a 2005 340 with different size props. One was 18x22 and the other 18x21.5 is this common?
  7. J

    Four bladed prop or three bladed prop

    I have a 1985 sea ray boat with a 350 chev engine. What I want to know is, has anyone try a four bladed prop on their boat of the size. I want to know if they get better gas mileage with the four blade prop. thank you john:smt038
  8. B

    searching for heat exchanger for 454 Mercruiser engines, Thief cut them out of my SR

    Looking for two Heat Exchanger, thief cut them out of my SR 340 Express while in dry dock in Crisfield, MD. Any for sale? Also took two props, ladder. bell dock power cables.
  9. S

    2007 320 Sundancer How Do I Put the Props On?

    The props had to be taken off when I had the new boat shipped down to me so now I need to get them back on. I asked Marine Max how much it would be and they wanted $150...not a chance! It's a double nut so I'm not sure if they just need to be tightened and will tighten on eachother or need to...
  10. B

    Prop to pull adult skiers

    My 190 bowrider has trouble pulling out an adult skier at sea level (4.3L). What prop would work best? I don't need fast cruising speeds. Any help is appreciated.
  11. S

    NEED!! 52 Sundancer Props 28"X 35"X 2.5" NI HSY

    I need to purchase props for my 2006 52 Sundancer. 28"X 35"X 2.5" NI HSY Thanks, Michelle
  12. troyzstang

    2008 Sundeck 200 Prop suggestions ( Please reply)

    I know another Prop question :smt021 Anyway it's a 2008 Sundeck 200 with 5.0 MPI / Alpha 1 The problem is getting on plane & maintaining a consistent speed. I'm assuming it's a stock Prop ( 19 Vengenge) Wot is about 45-48mph at 5,000rpm Most of our time is spent wakeboarding and simply...
  13. K

    2 Sets of Used Bravo 3 Props - 20P - for Sale

    2 Sets of used Brovo 3 Props - 20P - for sale. New $2600 - Selling for $1300 or best reasonable offer. Quantity Part#'s 2 @ 48-823661 20P 2 @ 48-823662 20P
  14. R

    SS props Wanted

    Looking for a set of Bravo 3 props 14 1/2 x 24P Prefer good condition but will look at any. Contact Rpearson502@aol.com Thanks Sundancer270 Crown N Water
  15. B

    Mercury lab finished bravo III xr props for sale

    To all, I have a set of 28 pitch, Mercury Lab Finished Bravo III XR props for sale. One right hand and one left hand rotation (each rotation is a set of two props, one front, one rear). These can work on all Bravo III drives, XR or standard B III's. $1995 for both sets, however I may consider...
Back
Top