prop

I would like to change out my 3 blade props to 4 blades for better low end performance ang getting out of the hole when loaded down. Any advice on the best pitch? My boat is a 2006 280 dancer with 4.3l engines. Also a good online resource to purchase them would be helpful. thx john

2 weeks ago, hit a log driving along going about 24 knots. Damn thing came out of nowhere, and I saw the tip of it just as it went under my anchor. After it hit, I could tell the prop was done. I had major vibration the higher I went with RPM's. Either way, the dent was on the starboard side...

Looking for pair of 15P or 17P, thanks!

Hi All, Well it was never a question of if, but when and my when was today. Thanks to a GPS that was off by about twenty yards and a negative tide I ran aground on some rocks in the Puget Sound this morning. Thankfully I didn't mess up my hull but I did mangle my prop and skeg on my...

Question, Has anyone used Pettit Zinc coat barnicle barrier on their trim tabs and props. I used to use it on my sail boat's bronze prop and shaft and it worked great. I have a Bravo 3 standard setup Dave

Hi Forum, I hope you can share your experience with me. I had to upgrade my SBC from 305 to 350. The old prop was left on the boat and now my full throttle rpm is above 5200. I would like to upgade to a 4 blade stainless steel prop. My engine should have 230HP and my sterndrive has a gear...

The props had to be taken off when I had the new boat shipped down to me so now I need to get them back on. I asked Marine Max how much it would be and they wanted $150...not a chance! It's a double nut so I'm not sure if they just need to be tightened and will tighten on eachother or need to...

I have a 17pitch three blade stainless steel prop on my O'l Yeller and if I have more than four people on board it feels like I’m taking off in third gear. It takes forever to plane out. The mechanic working on her told me I should go to a three blade aluminum 15pitch. I just dropped $500.00...

I have a pair of new Nibral props made by Hy Torq 24 x 25 4 blade, contact me if interested. 1cheesehead@gmail.com

For sale are 2 pairs of nibral cupped props in good used condition. first: Pair of 17 X 17 X 1 1/4" props for 31 / 33 Sundancer series. (LH & RH) second: Pair of 18 X 20 X 1 1/4" props for 370 Sedan bridge. (LH & RH) Third: Aluminum Michigan wheel prop, 13.75 X 21" for Alpha drive. Originally...

I have and almost new 21 Pitch Mercruiser High Five prop that I am interested in trading for a same condtion 17 Pitch High Five Prop. I already have a 19P high five that is my all around prop and I want a lower pitch for those times that I am heavily loaded or high altitude. The 21P worked...

Question about propeller Does anybody know the best pitch (& any other specs) for a 1991 220 Sundancer with a 5.7 Merc engine? Thank you!

Prop threads are popular, so here is a new one: A rock damaged my OEM 14 X 19 aluminum prop. I purchased a 14 x 19 stainless Quicksilver Lightspeed. I was not looking for any magic bullet, but was hoping for some benefit. I suspect my tach is out of whack because with both props it easily...

Hello all, I'm in the market for a new prop, and have no idea where to start. I'm only looking for a stainless. I have a 2001 210 bowrider, with the 5 liter and alpha drive. I currently have 2 props, one SS, and one alumn. Aluminum prop has the following markings "48 78122 A40 21P" I...

I just purchased a 77 Sea Ray SRV 220 Hard Top with a 351 Ford and 235 OMC outdrive, a classic style that I've loved since I was a kid... Drive engages, Reverse sometimes engages, and then Drive and Reverse will not engage. Any thoughts as to what the problem may be? Also, where can I locate...

I have a Sea Ray 400 Sedan Bridge with Cat 3116 engines. I am looking for spare props and a spare shaft. Used and good condition would be good... Props are 4 blade 22 inch by 24 degree Nibral (22/24 Nibral). We are planning to cruise the Bahamas and you Murphy's Law...

Just picked up a (new to me) 2005 220 Select from a private owner. During the water trial the boat performed flawlessly, but I think I would like for it to come up on plane faster. It has the 350 Mag with a Bravo III out-drive and 28 pitch props. I think I might get the performance I am looking...