Can anyone provide a vector here? I have a 2001 Sundancer 280 and the cabin door was difficult to slide back and forth. It sqeaked loudly and just wasn't mving freely. I though maybe the top and bottom rail tracks, bushings, and bearings need to be replaced. So I purchased new ones and then...
On my 2007 320 DA the outside fridge door will not open. I pull the latch at the top of the door but it stays latched. I've searched the forums as well as googled with no luck. Any ideas?
So I am looking for the whole assembly or just the "plunger" for this door release/catch mechanism. The spring loaded plunger is gone but would certainly buy the whole thing if I need to. I don't think it's unique to a 420DA. Have called Pounder, Marine Max, and have looked all week for this...
Hello
Looking for help with the cabin sliding door on my 2007 310 Sundancer. Seems as though the "upper track" is gone or loose. The fixed portion track is still there but the sliding door right to left is really loose. Seems as though a shim or something is missing and makes the door harder...
My 99 310DA had issues with the plastic track at the top and was broken off in several parts. The track rollers were damaged as well, missing the wheels completely and just sliding on the plastic. After doing a lot of research and realizing that Sea Ray doesn't carry this part anymore, I noticed...
Hi all,
I have recently acquired 1986 270 Sundancer.
Its a big project, since a LOT of stuff need to be replaced.
I need to replace a missing tri-fold hatch door (just like the one on the attached picture)
If anyone has same boat, can you provide me with set of close up pictures or link where I...
Does anyone have any tips to repair a broken grab rail that leads to the foredeck? It is part number 1846671 on the 2007 310 Sundancer. Looks like I might have to take the door off, but can't figure out how to do that either. It seems like a really poor design.
Any input would be...