bilge pump switch wiring

  1. S

    Bilge pump wiring

    Does anyone know what the 4 wires coming out of the harness to the bilge pump go to? :huh: :smt100 I have a 2000 245 Weekender. I am able to see that one of the brown wires is hot all the time, but there is another brown and 2 black wires left. Obviously 1 black is ground. I have the brown...
  2. J

    Access to IP Switches - 1987 Sundancer 250

    I recently bought a 1987 Sea Ray Sundancer 250 in very good condition for its age but the Bilge Pump switch is not working properly. The switch pilot light comes on when the switch is in the “on” position but I get nothing at the pump. There is no voltage difference at the feeds to the...
    • jfraysse
    • Thread
    • bilge pump switch wiring instrument panel access renovation rewiring
    • Replies: 0
    • Forum: Electrical Stuff
  3. G

    Bilge pump, switch, not getting power

    I have '97 19' Bow Rider. Bilge pump stopped responding. I tested the pump and it works. Voltmeter shows no voltage at the pump connector or control switch itself. Fuses all check out. What am I missing?
Back
Top