Search results

  1. jcoyrochny

    Chain size for a Lofrans Scorpion Windlass - 1989 268DA

    I have a Lofrans Scorpion windlass in my 1989 268DA, I'm looking to find out what size chain it would take at the gypsy. Hopefully some of you still have and are using a chain/rope anchor.
  2. jcoyrochny

    Checking ground problems on a 7.4L 454

    Can anyone tell me where to start checking for ground problems on my 454, keep having electrical problems, now the stereo does not work although the hot wire reads 12.38V
  3. jcoyrochny

    1989 268DA Canvas for Sale

    I have the the following for sale for a 1989 Sea Ray 268 Sundancer, they are good in good shape, the eisenglass has been taken care of and all of the zippers work. One Piece Visor Side Curtains Aft Curtain They easily attach to the bimini top if you have an original top. I also have the...
  4. jcoyrochny

    What is the defference between a Bravo I 1:50.1 and a 1:65:1

    Just busted my Bravo I 1:50.1 so I brought it to the mechanic he could not find me a 1:50 ratio but he did find a 1:65 which according to him would not be much difference, the engine is a 7.4L V8 330 hp, any suggestions. He also told me that for the most part all bravo bottoms are about the...
  5. jcoyrochny

    Taking on water?????

    My marina called be to let me know that when they put the boat down yesterday from the dry stack that I could not use it this weekend because it was taking on water, however, they did not know where it was coming from. I had no problems when I used the boat the last time and definitely was not...
  6. jcoyrochny

    Outdrive paint

    What kind of paint is best to use on the outdrive?
  7. jcoyrochny

    Rust-Olieum Antifouling Black Paint

    Has anyone here used this Rust-Olieum product for their bottom paint yet?
  8. jcoyrochny

    Moving to the Charleston SC area - need info

    Could someone provide me with some nfo about the Charleston area - i.e. marinas, taxes, good neighborhoods, I'm currently on the road in the RV down here in Florida and will be stopping by sometime in mid April to check things further. I will be bringing the boat down from the Rochester, NY area...
  9. jcoyrochny

    Anyone from the Norfolk Area

    I will be moving south this coming summer and if anyone could provide me with information about military marinas within the Virginia Beach/Norfolk area I would really appreciate it.
  10. jcoyrochny

    Replacing gauges on a 1989 268DA

    I would like to replace all of the gauges on my 1989 268DA, has anyone ever done this and where do I begin, some of the gauges look simple to do, others are out of reach so I will need to know how to remove the panel.:smt101
  11. jcoyrochny

    Done with this year's upgrades

    :smt038Almost done with Miss Windshift. Lots of dollars into it this year. Rewired 1/2 of her, seems like the past owner kept on adding things but never tagged or removed the old wiring (what a headache). Installed new Garmin Fishfinder 400C Installed new Garmin VHF 100 Instaled 2 new PFD-IV...
  12. jcoyrochny

    Done with upgrades for this year

    :smt038 Almost done with Miss Windshift. Lots of dollars into it this year. Rewired 1/2 of her, seems like the past owner kept on adding things but never tagged or removed the old wiring (what a headache). Installed new Garmin Fishfinder 400C Installed new Garmin VHF 100 Instaled 2 new PFD-IV...
  13. jcoyrochny

    TV Antenna/VHF Antenna

    :smt100I just purchased a Shakespeare Sea Watch 2025, my question is - how far should I put the TV antenna from the VHF antenna?
  14. jcoyrochny

    NMEA wiring to VHF

    :smt100I normally take out all of my electronics at the end of the season because of the extreme cold weather. I have a Garmin GPSMAP 172C and a Garmin VHF 100 radio that I always connect the NMEA cables to it, however, at the end of the season, I have to cut the wires again. Has anyone...
  15. jcoyrochny

    Sun Pad

    looking for a sun pad for a 1989 268DA sundancer, also main deck forward hatch. Any help would be appreciated.
  16. jcoyrochny

    Stainless Steel Prop

    I would like to get a SS prop (4 blades) for my 1989 268DA, 7.4L 330 HP with a Bravo I - does anyone have any good suggestions. I do not want to run it, I just want enough to get out of the hole quicker and travel smoother.
  17. jcoyrochny

    Which Prop Would Be Best

    I would like to purchase a new prop for my Bravo 1, I would like to go into a SS four blade prop. however, I do no have any idea on the pitch and size that I should get. Could anyone recommend one?
  18. jcoyrochny

    Looking for 18X18 deck hatch

    I'm looking to replace my deck hatch, the parts list that I have lists as #226829 - Low Profile Deck Hatch.
  19. jcoyrochny

    Prop for Bravo I

    The tech that winterized my boat this year told me that I should have a SS prop on my Bravo I OD, he indicated that the prop that I currently have on is just too light for the OD, is he giving me the correct advise?
  20. jcoyrochny

    1989 268DA Macerator

    Just purchased this beautiful Sundancer, I have a Jabsco Macerator pump in the head and there is a key switch that I cannot get any of the keys that came with the boat to work the switch. I have been digging at this for almost a month and cannot get an answer from Jabsco in regards to how I...
Back
Top