this weekend I had my boat out at an event and the generator was running fine and the air conditioning was on. I went and had a bite to eat and when I got back the generator was running and the air was off. The voltage meter on the panel showed 25volts. I checked the fuse and it was fine. For...
Ok I have an update on my issue. We now rebuilt the starboard side shifter and still have no fluid coming out from the bleeder at the std slave. Blew out all the lines and pressurized the system and nothing. It is almost like the exchange valve is stopped up. However we removed the valve from...
Today I vacuumed out the condenser and ran compressed air through the condenser and it still shut down even with compressed air pushing through the condenser. Just a minute or two away from throwing the u it in the lake
Sent from my iPad using Tapatalk
Yes you can but the tech actually told me that they no longer put the lower pressure switch on units and that I can bypass it and not worry about it
Sent from my iPad using Tapatalk
I really don't think that the water is the issue. The flow from the unit is very good. Probably better then it has ever been
Sent from my iPad using Tapatalk
So after fighting with the A/C u it for the past 4 Days I am stumped. I used Barnicle Buster on Friday and let it sit and bust loose all the crap for 6 hours before I restarted the unit and to my surprise, it made absolutely no difference. The unit in my guest bedroom will run for 2 minutes and...
Aft r rebuilding the port side shifter lever at the helm we went to refill the system and purge out the air. Worked great on the port side that required the rebuild. However after hours and hours of trying to get fluid to the starboard side helm shifter we can't get it to bleed. We have tried...
We got the port side rebuilt and all is fine with the port now and for some reason we can't get the starboard side to pressurize. We have to be missing something stupid. We remover the bleeder completely and no fluid comes out at all. We even tried to blow air through the lines and can't even...
Ok did a little research and found out that they make a seal kit for the Hynautic shifter. Not sure how quick I can get one or where I can get one from but I also found out that the piece we can't seam to get off is a bushing that often wears out. Now the big questions are how touch it will be...
Took the 500 out for the first time this year since we bought the marina back in October and sprung a leak in my port side shifter housing and lost shifting capability on the port side.We removed the port side shifter housing and noticed that the leak is coming from behind a ring with two holes...
I am getting great flow through the other two units. It is just the unit it in the guest berth that is giving me some trouble. So the flow out of the two through halls is great unless it is plugged up from the unit in the guest berth to the through hall. I think the master berth and the guest...
Update on cooling system, I added a 1" tablet of chlorine into my strainer and after a day the unit began to run for exactly 2 minutes and then quits again. It fires back up after 30 minutes and quits again. Now I am getting a low/ps error message.
I tried another tablet and it made no...
Hey Brian, Steve here. I am at Cedar Creek Marina also. I have the boat a few down from you. 96 500 dancer "Size Matters" let me know if you decide to sell, i may have some people that may be interested.
Steve Bone