Search results

  1. C

    OFFICIAL 390/40 Motor Yacht Thread

    Wonder if he’s referring to a 390 Sundancer ? I believe they had that power package available.
  2. C

    OFFICIAL 390/40 Motor Yacht Thread

    I bought an LG 28". If you remove the corner piece on the starboard salon couch, there is an access door for the ac's. You can get to the back of the tv from there.
  3. C

    OFFICIAL 390/40 Motor Yacht Thread

    Mine for some reason does not. Just the shelf with no visible screws etc. Was it like an access panel screwed in the shelf itself? If so I may need to create one. Thnx
  4. C

    OFFICIAL 390/40 Motor Yacht Thread

    No panel in mine. But if there is no other way there will be.TY
  5. C

    OFFICIAL 390/40 Motor Yacht Thread

    Does anyone know how to remove the TV in the aft stateroom(06 MY)?Can't seem to find anything. Pulled the access panel to the salon ac's and found the salon TV bolts for removal, but can't access the aft. Any suggestions?
  6. C

    ZF Hurth HSW 800V1 Manual

    What ATF did you use? I'll be changing mine soon and just found out that when the boat was serviced in the spring when I took delivery it had Valvoline MaxLife ATF full synthetic in it. Not sure if that is recommended by ZF since like mentioned they have the European versions. No issues with...
  7. C

    Bonding wire size

    Hi, Looking to order some green bonding wire and hardware to reconnect the strainers etc. What size wire did they use on an 06 40 MY? TY
  8. C

    OFFICIAL 390/40 Motor Yacht Thread

    Can’t figure out how to remove the master stateroom tv. Any ideas?
  9. C

    OFFICIAL 390/40 Motor Yacht Thread

    Thank you!!!
  10. C

    OFFICIAL 390/40 Motor Yacht Thread

    Moving forward with a contract on an 06 40MY QSB 425's (217 hrs). The boat is on the Potomac in VA. Looking for recommendations for a hull surveyor as well as a Cummings engine surveyor to do a complete work up, including analysis of the seawater side, oils, engine loads etc. Called Cummins in...
  11. C

    OFFICIAL 390/40 Motor Yacht Thread

    Hi all, Sold our 370 DA and are in the market for a 39/40 MY. I know the potential issues with the 480CE in regards to over-propping,cooling maintenance etc. But can't find much about the QSB 425. Anything specific to look for ? TY
  12. C

    Can you help me identify the purpose of these? (swim platform/davit - 44DA)

    Brackets for the original Hurley davit. Have them on mine.
  13. C

    Official 370 Sundancer thread

    I would check the Capacitor. Had a similar problem.
  14. C

    Official 370 Sundancer thread

    The mounts are for the bimini bars. You unzip, roll up the front canvas around the bar, move the bar from the original attachment point and place in the mounts. There is a cover that goes over the rolled up bimini that has zippers that attach to the arch in the same manner as the top attaches to...
  15. C

    Transducer angle?

    Curious did you install this system and what transducer did you chose ? I'm purchasing the same system and trying to decide which transducer would fit this application best..
  16. C

    370 transducer?

    Purchasing a Simrad radar/gps/sounder for my 95 370 dancer and was wondering what transducer would fit this application. There are 2 choices, a zero to 12 deg or a 12 to 24 deg. I know the deadrise is 20 deg but not sure if it flattens out away from the centerline. Any input would be appreciated. Ty
  17. C

    Wanted: Mid/Late '90's 370DA (Great Lakes)

    I have a 95 that I just listed with 625 hrs maintained and updated..PM if interested..Boat is in NJ..
  18. C

    NJ Boaters- Anyone in the Navesink/Shrewsbury?

    Navesink as well...A Dock...
  19. C

    NJ Boaters- Anyone in the Navesink/Shrewsbury?

    I am..Sea Bright.
  20. C

    Official 370 Sundancer thread

    Need to replace the exhaust water hose that goes from the center of the fiberglass tube to the muffler and then out the side (7.4 Bluewater) it's corrugated. Does anyone know what diameter that hose is ? Trying to order one now so I have it for the weekend and the boat is 1 1/2 hr away...Thank...
Back
Top