Search results

Not much else really, Seeing the pics before you pull the panels apart would be helpful, if I have them, you will not need to send them. Thanks Ken.

Probably not but if you can get a picture of yuoru console I can check, either way I most likely can reproduce it

I can probably help you with the actual panels, but Ken over and fpmarine would be the first place to check for the actual gauges and components. He might even have the whole setup Thanks Scott Vector Imaging

Sure, here are a few searay panels I have done, some before and afters. You can really see in the 4th pic that my burl looks like real burl wood and searays looks like smeared paint.

I have a 180 Gradywhite sportsman,with a 1985 115PTT Johnson and a caulkins trailer. It was given to me and was in need of a floor and transom. I fixed it all up and use it for trolling for Striper in the Narraganset Bay.

Frank the 330 is my most popular model. I can do them no problem. for backlighting I use LED's that are pretty bright, but if they are too bright I can change the resistace to suit you. I do not use EL tape because it does not last , I used to use it and ended up replaceing a lot of it so now...

Thanks Jim, I am very happy to be here, I have been making replacment searay panels now for the past couple years. there is no panel I cannot reproduce and I already have quite a few of the templates from the 270's to the 450's and many in between. My pricing is also much less then what searay...

Hahah, that's right your 1885 breakdancing panels :grin: I am planning on working ont hem this weekend so stay tuned :wink: Bliss, you need anything just call, I will help in any way I can

From me, I sell them for about 3 bucks each, and I have the excell spreadsheet with all of the switches so I can put a kit together for you. Bliss, I will talk to BobV, he has already done it and can probably help you out with the wiring, I will do my best to hook you two up Sorrento...

Removeing the switch covers (actuators) is very easy once you get the hang of it. You get a slotted screwdriver (flathead) and lay it's blade flat on the base of the switch, you slip it under the spot where the actuator and body meet together and pivot , gently twist the screwdriver away from...

Thanks man, i really love doing it, especially these sea Ray panel because they look so nice when finished, I am thinking of replacing my grady white panel with this burl material, I love it. It also makes me feel good knowing I am helping you guys get your boats back to where they should...

Hey guys, some of you might know me from the thread going about the new panels I am making for the 330. Well I am happy to say I just finished the 400 series panels today. Here are some pics of the three I did. Check out the systmes monitor, the OEM panel had holes for each LED. My customer...

Larry, I have your gauge panel and half of your switch panel cut, I am just waiting on more adhesive, you guys are running me out of this stuff fast :grin: I should have it tomorrw then it will be cut and shipped imediatly after. excuse my spelling guys I type too fast and have limited time,

thanks guys, Bliss, I am happy your reiced them and are happy, you should have no problem with them, here is a picute of a customer who wanted a pulg and play panel with all the correct switches and thanks to eric ont his site I was able to do it right. I installed the backlighting and all...

the first is 500 dollars from SeaRay the second is 450 from SeaRay and the third is 300 dollars from SeaRay all prices are just for the panels themselves and are discountinued which is why a member here contacted me to duplicate them. I sell the first two for 350 for both :wink: Besides...

I sure do, THANKS! what a nice spreadsheet, it is exactly what I needed, you cured a huge headache for me Eric. anything you need in the future will get special pricing :wink:

I stock the carling line of switches as well so I should have everything I need but I just need to double check. the spreadsheet would be a nice thing to have, but I was hoping you had a drawing or picture of the back fo the panel. thanks I appreciate your help. Also I ordered some halon...

did you buy exact replacements? If so could I truble you for a copy fo the layout, I have a drawing here but I would like somthing to compare it to, like for instance which switches are spst and spdt and so on, I need to build a panel that will plug directly into the existing harness so this...

I just took a look, I could make you whatever you like including putting your boat name or whatever graphic you might want on them. I could make a matching plate for the panel under the helm as well. I can engrave any text and it all will be able to be back lit for night viewing.. There is...

thanks Eric, I appreciate the kind words. I have just ordered more of the burl material so i wil have plenty of stock to make them, I am makeing a full plug and play 330 switch panel including new el lighting. When it is done I will post pics witht he switches in and it lit up. I will also...